<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
Hi Michael,<br>
<br>
Looks good! <br>
<br>
The order for starting the obdii ecu task and the vehicle it draws
data from isn't critical; nothing bad will happen if by some chance
the OBDII device starts requesting information before the vehicle
task makes it available. I suppose, the "most correct" sequence
would start the vehicle task, then the obdii ecu task, then enable
the ext12v power last, but in practice and by design there is no
issue with starting any of them in pretty much any order. Worst
case, the device it would get zeros if it wins the race, but I catch
those internally and prevent the apparent lack of a running ICE
engine from causing the device to shut down by supplying dummy
information.<br>
<br>
The only thing missing in the web server, I suppose, would be a way
to customize the PID-to-Metric mapping. I supply a default for the
most common ones, but there are many more possible if you are using,
say, an ELM 327 dongle with Torque-like application. Changing the
mapping is easily done through the shell (unless you want to tackle
that with the web server too). 'config set obd2ecu.map <pid>
<metric>' to set the mapping, and 'obdii ecu list' to display
the mapping and current values.<br>
<br>
Thanks for doing this!<br>
<br>
Greg<br>
<br>
<br>
<div class="moz-cite-prefix">Michael Balzer wrote:<br>
</div>
<blockquote type="cite"
cite="mid:3910604d-9c23-0cf5-5960-461c3f555b58@expeedo.de">
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
Greg,<br>
<br>
I've just added ext12v and obd2ecu to the auto init system &
web config.<br>
<br>
So except for the metric set command, you should now be able to
start your module without a script.<br>
<br>
The autostart sequence is slightly different from yours, the
obd2ecu init is done after the vehicle module init, as I see the
vehicle module as the data provider for the obd2ecu module --
correct me if I'm wrong.<br>
<br>
Can you please verify the start sequence is working as expected?<br>
<br>
Regards,<br>
Michael<br>
<br>
<br>
<div class="moz-cite-prefix">Am 25.02.2018 um 22:08 schrieb Greg
D.:<br>
</div>
<blockquote type="cite"
cite="mid:2e10a9a9-d3b1-66c5-314e-a643b0574af7@gmail.com"><br>
Here's my system.start event file:<br>
<blockquote><tt>OVMS > vfs cat
/store/events/system.start/mystartup</tt><br>
<tt>obdii ecu start can3</tt><br>
<tt>power ext12v on</tt><br>
<tt>wifi mode client gregnet3</tt><br>
<tt># power simcom on</tt><br>
<tt>vehicle module TR</tt><br>
<tt>server v2 start</tt><br>
<tt>metric set v.b.soc 55</tt><br>
<tt>OVMS > </tt><br>
</blockquote>
(Before you ask, the setting of the soc metric is so that I can
see the server is actually talking to the module, when the
module's on the bench.)<br>
</blockquote>
<br>
<pre class="moz-signature" cols="160">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
OvmsDev mailing list
<a class="moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.teslaclub.hk">OvmsDev@lists.teslaclub.hk</a>
<a class="moz-txt-link-freetext" href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br>
</body>
</html>