<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
Tried & kept :)<br>
<br>
With vehicle module running, connectivity _and_ SD card mounted, I
now have<br>
<blockquote><tt>OVMS > module memory </tt><br>
<tt>Free 8-bit 46200/285768, 32-bit 17948/45120, SPIRAM 0/0</tt><br>
</blockquote>
Great find. I hope that won't affect SD write performance too badly.<br>
<br>
<br>
While testing I found a bug: after a manual "sd unmount" I get lots
of<br>
<blockquote><tt>E (121106) sdmmc_req: handle_idle_state_events
unhandled: 00000008 00000002</tt><br>
</blockquote>
…and new mounts afterwards won't work.<br>
<br>
Regards,<br>
Michael<br>
<br>
<br>
<div class="moz-cite-prefix">Am 19.01.2018 um 01:39 schrieb Mark
Webb-Johnson:<br>
</div>
<blockquote type="cite"
cite="mid:4223F819-078A-4FDC-AA65-FC8502BF340A@webb-johnson.net">
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
Michael: Can you try menuconfig Component / FAT Filesystem support
/ Use separate cache for each file -> OFF. Documentation shows
that controlling the FS_TINY flag (which sounds like something we
want).
<div class=""><br class="">
</div>
<div class="">With wifi, DEMO vehicle module, sd mounted, and
server v2 running, I get:</div>
<div class=""><br class="">
</div>
<blockquote style="margin: 0 0 0 40px; border: none; padding:
0px;" class="">
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 18px;" class="">Free 8-bit 70136/282488,
32-bit 17660/44832, SPIRAM 0/0</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 18px;" class=""><br class="">
</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 18px;" class="">OVMS > sd unmount</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 18px;" class="">OVMS > module memory<br
class="">
Free 8-bit 77604/282488, 32-bit 17660/44832, SPIRAM 0/0<br
class="">
--Task-- Total DRAM D/IRAM IRAM SPIRAM +/- DRAM
D/IRAM IRAM SPIRAM<br class="">
tiT 356 1088 0 0 +16
-20 +0 +0<br class="">
Tmr Svc 20 528 0 0 -860
-6444 +0 +0</span></font></div>
</blockquote>
<div class="">
<div><br class="">
</div>
<div>Using “separate cache for each file”, I get:</div>
<div><br class="">
</div>
</div>
<blockquote style="margin: 0 0 0 40px; border: none; padding:
0px;" class="">
<div><font class="" face="Andale Mono"><span style="font-size:
18px;" class="">Free 8-bit 29156/282496, 32-bit
17660/44832, SPIRAM 0/0</span></font></div>
<div><font class="" face="Andale Mono"><span style="font-size:
18px;" class=""><br class="">
</span></font></div>
<div><font class="" face="Andale Mono"><span style="font-size:
18px;" class="">OVMS > sd unmount</span></font></div>
<div><span style="font-size: 18px; font-family: "Andale
Mono";" class="">OVMS > module memory</span></div>
<div><font class="" face="Andale Mono"><span style="font-size:
18px;" class="">
<div>Free 8-bit 57096/282496, 32-bit 17660/44832, SPIRAM
0/0</div>
<div>--Task-- Total DRAM D/IRAM IRAM SPIRAM +/-
DRAM D/IRAM IRAM SPIRAM</div>
<div>Tmr Svc 0 552 0 0
-4 -27780 +0 +0</div>
</span></font></div>
</blockquote>
<div class="">
<div><br class="">
</div>
<div>Seems to be 27KB vs 7KB per filesystem mount, and we have
two (/sd and /store). Overall win with FS_TINY for FAT is
close to 41KB.</div>
<div><br class="">
</div>
<div>Regards, Mark.</div>
<div><br class="">
<blockquote type="cite" class="">
<div class="">On 17 Jan 2018, at 9:23 AM, Mark Webb-Johnson
<<a href="mailto:mark@webb-johnson.net" class=""
moz-do-not-send="true">mark@webb-johnson.net</a>>
wrote:</div>
<br class="Apple-interchange-newline">
<div class="">
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8" class="">
<div style="word-wrap: break-word; -webkit-nbsp-mode:
space; line-break: after-white-space;" class="">Note
also that the memory debugging option adds a bit of
overhead.
<div class=""><br class="">
</div>
<div class="">With debugging enabled (heap: light
impact):</div>
<div class=""><br class="">
</div>
<blockquote style="margin: 0 0 0 40px; border: none;
padding: 0px;" class="">
<div class="">
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">OVMS >
module memory</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">Free 8-bit
79868/282496, 32-bit 17660/44832, SPIRAM 0/0</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">--Task--
Total DRAM D/IRAM IRAM SPIRAM +/- DRAM
D/IRAM IRAM SPIRAM</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">no task
5312 0 0 0 +5312
+0 +0 +0</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">esp_timer
49568 0 644 0 +49568
+0 +644 +0</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">main
39444 0 0 0 +39444
+0 +0 +0</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">ipc0
11096 0 0 0 +11096
+0 +0 +0</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">Housekeeping
24740 19956 0 0 +24740
+19956 +0 +0</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">tiT
132 0 0 0 +132
+0 +0 +0</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">Tmr Svc
4 27800 0 0 +4
+27800 +0 +0</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">ipc1
12 0 0 0 +12
+0 +0 +0</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">AsyncConsole
0 36 26404 0 +0
+36 +26404 +0</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class=""><br class="">
</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">OVMS >
metrics list m.freeram</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">m.freeram
79868</span></font></div>
</div>
</blockquote>
<div class="">
<div class=""><br class="">
</div>
<div class="">With debugging enabled (heap:
comprehensive):</div>
<div class=""><br class="">
</div>
</div>
<blockquote style="margin: 0 0 0 40px; border: none;
padding: 0px;" class="">
<div class="">
<div class="">
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">OVMS >
module memory</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">Free 8-bit
79728/282320, 32-bit 17968/45140, SPIRAM 0/0</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">--Task--
Total DRAM D/IRAM IRAM SPIRAM +/- DRAM
D/IRAM IRAM SPIRAM</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">no task
5312 0 0 0
+5312 +0 +0 +0</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">esp_timer
49568 0 644 0
+49568 +0 +644 +0</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">main
39444 0 0 0 +39444
+0 +0 +0</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">ipc0
11096 0 0 0 +11096
+0 +0 +0</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">Housekeeping
24644 20056 0 0 +24644
+20056 +0 +0</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">tiT
132 0 0 0
+132 +0 +0 +0</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">Tmr Svc
4 27800 0 0
+4 +27800 +0 +0</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">ipc1
12 0 0 0 +12
+0 +0 +0</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">AsyncConsole
0 20 26404 0 +0
+20 +26404 +0</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">I (15614)
simcom: State timeout, transition to 13</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">I (15614)
simcom: State: Enter PoweredOff state</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">OVMS >
metrics list m.freeram</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">m.freeram
79728</span></font></div>
</div>
</div>
</blockquote>
<div class="">
<div class=""><br class="">
</div>
<div class="">With debugging disabled:</div>
<div class=""><br class="">
</div>
</div>
<blockquote style="margin: 0 0 0 40px; border: none;
padding: 0px;" class="">
<div class="">
<div class="">
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">OVMS >
module memory</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">To use
these debugging tools, must set
CONFIG_HEAP_TASK_TRACKING=y</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">and have
updated openvehicles/esp-idf</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">OVMS >
metrics list m.freeram</span></font></div>
<div class=""><font class="" face="Andale Mono"><span
style="font-size: 14px;" class="">m.freeram
99956</span></font></div>
</div>
</div>
</blockquote>
<div class="">
<div class=""><br class="">
</div>
<div class="">I think we’ve still got some stuff we
can look at to lighten the impact on internal
memory. Once we can get the 3.1 hardware out, I can
focus on that. The memory tools Steve has built are
really complete and usable now. They let us see
exactly what is going on.</div>
<div class=""><br class="">
</div>
<div class="">If we had known going in that the 520KB
SRAM of the ESP32 would be 80% used by the system,
and only 20% for us, perhaps things would have been
done differently. Anyway, we are where we are, and
the WROVER module should be able to move a bunch of
stuff off to PSRAM.</div>
<div class=""><br class="">
</div>
<div class="">Regards, Mark.</div>
<div class=""><br class="">
<blockquote type="cite" class="">
<div class="">On 17 Jan 2018, at 12:59 AM, Michael
Balzer <<a href="mailto:dexter@expeedo.de"
class="" moz-do-not-send="true">dexter@expeedo.de</a>>
wrote:</div>
<br class="Apple-interchange-newline">
<div class="">
<meta http-equiv="Content-Type"
content="text/html; charset=utf-8" class="">
<div text="#000000" bgcolor="#FFFFFF" class="">
Bluetooth is disabled. Has been for a while, I
don't see a chance to enable it with the 3.0
module.<br class="">
<br class="">
I've also disabled Javascript support
(duktape), Wolf, the web server and MDNS and
the OBD2ECU. Telnet is enabled as I sometimes
use that parallel to the async console.<br
class="">
<br class="">
That config gives me…<br class="">
<pre class="" wrap="">OVMS > module memory
Free 8-bit 117364/286352, 32-bit 17972/45144, SPIRAM 0/0</pre>
…after reboot (without SD card), and with
Wifi, modem, Twizy & server v2 running
& connected…<br class="">
<br class="">
<tt class="">OVMS > module memory </tt><tt
class=""><br class="">
</tt><tt class="">Free 8-bit 23436/286352,
32-bit 17972/45144, SPIRAM 0/0</tt><tt
class=""><br class="">
</tt><br class="">
…when idle, will drop further with
transmissions pending etc.<br class="">
<br class="">
Opening a telnet session then results in:<br
class="">
<br class="">
<tt class="">OVMS > module memory </tt><tt
class=""><br class="">
</tt><tt class="">Free 8-bit 18372/286352,
32-bit 17972/45144, SPIRAM 0/0</tt><tt
class=""><br class="">
</tt><br class="">
…and still stable.<br class="">
<br class="">
Regards,<br class="">
Michael<br class="">
<br class="">
<br class="">
<div class="moz-cite-prefix">Am 16.01.2018 um
01:11 schrieb Mark Webb-Johnson:<br class="">
</div>
<blockquote type="cite"
cite="mid:25C30E63-9CA7-4FFB-8D43-3AA77DF6E6B1@webb-johnson.net"
class="">
<pre class="" wrap="">I’m seeing this:
OVMS > module memory
Free 8-bit 79812/282268, 32-bit 17816/44988, SPIRAM 0/0
OVMS > sd unmount
Unmounted SD CARD
OVMS > module memory
Free 8-bit 107768/282268, 32-bit 17816/44988, SPIRAM 0/0
--Task-- Total DRAM D/IRAM IRAM SPIRAM +/- DRAM D/IRAM IRAM SPIRAM
Tmr Svc 0 20 0 0 -4 -27780 +0 +0
I guess it is FAT fs stuff, but we use that for /store as well so not sure why so much. I will look into it.
With wifi client, ovms server v2, tesla roadster vehicle module, I get this:
OVMS > module memory
Free 8-bit 54224/282268, 32-bit 17816/44988, SPIRAM 0/0
With the OBDII HUD, that drops to 45KB.
Do you have bluetooth enabled (in menuconfig)?
Regards, Mark.
</pre>
<blockquote type="cite" class="">
<pre class="" wrap="">On 16 Jan 2018, at 3:35 AM, Michael Balzer <a class="moz-txt-link-rfc2396E" href="mailto:dexter@expeedo.de" moz-do-not-send="true"><dexter@expeedo.de></a> wrote:
I've found the missing RAM. It's allocated for the SD card:
OVMS > module memory
Free 8-bit 117364/286352, 32-bit 17972/45144, SPIRAM 0/0
I (34235) sdcard: SD CARD has been inserted. Auto-mounting...
OVMS > module memory
Free 8-bit 89348/286352, 32-bit 17972/45144, SPIRAM 0/0
--Task-- Total DRAM D/IRAM IRAM SPIRAM +/- DRAM D/IRAM IRAM SPIRAM
Tmr Svc 4 27804 0 0 +4 +27804 +0 +0
I (68065) sdcard: SD CARD has been removed.
OVMS > module memory
Free 8-bit 117332/286352, 32-bit 17972/45144, SPIRAM 0/0
--Task-- Total DRAM D/IRAM IRAM SPIRAM +/- DRAM D/IRAM IRAM SPIRAM
Tmr Svc 0 12 0 0 -4 -27792 +0 +0
…again…
OVMS > module memory
Free 8-bit 117332/286352, 32-bit 17972/45144, SPIRAM 0/0
--Task-- Total DRAM D/IRAM IRAM SPIRAM +/- DRAM D/IRAM IRAM SPIRAM
Tmr Svc 0 12 0 0 -4 -27792 +0 +0
I (114985) sdcard: SD CARD has been inserted. Auto-mounting...
OVMS > module memory
Free 8-bit 89348/286352, 32-bit 17972/45144, SPIRAM 0/0
--Task-- Total DRAM D/IRAM IRAM SPIRAM +/- DRAM D/IRAM IRAM SPIRAM
Tmr Svc 4 27804 0 0 +4 +27792 +0 +0
E (141205) sdmmc_cmd: sdmmc_read_sectors_dma: sdmmc_send_cmd returned 0x107
E (141205) diskio_sdmmc: sdmmc_read_blocks failed (263)
I (141515) sdcard: SD CARD has been removed.
OVMS > module memory
Free 8-bit 117332/286352, 32-bit 17972/45144, SPIRAM 0/0
--Task-- Total DRAM D/IRAM IRAM SPIRAM +/- DRAM D/IRAM IRAM SPIRAM
Tmr Svc 0 12 0 0 -4 -27792 +0 +0
Btw, I think the RAM usage of the telnet server is also higher than before:
OVMS > module memory
Free 8-bit 117332/286352, 32-bit 17972/45144, SPIRAM 0/0
OVMS > wifi mode client
Starting WIFI as a client for any defined SSID
I (380175) wifi: wifi firmware version: 403db1d
I (380175) wifi: config NVS flash: enabled
I (380175) wifi: config nano formating: disabled
I (380185) wifi: Init dynamic tx buffer num: 16
I (380185) wifi: Init data frame dynamic rx buffer num: 16
I (380185) wifi: Init management frame dynamic rx buffer num: 16
I (380185) wifi: wifi driver task: 3ffe3db4, prio:23, stack:4096
I (380185) wifi: Init static rx buffer num: 4
I (380185) wifi: Init dynamic rx buffer num: 16
I (380195) wifi: wifi power manager task: 0x3ffe846c prio: 21 stack: 2560
I (380195) wifi: mode : sta (30:ae:a4:37:25:88)
W (390205) wifi: incorrect scan type: 1073534024
I (392615) esp32wifi: Found SSID devolo-f4068d73a03e - trying to connect
I (393945) wifi: n:11 2, o:1 0, ap:255 255, sta:11 2, prof:1
I (394595) wifi: state: init -> auth (b0)
I (394605) wifi: state: auth -> assoc (0)
I (394605) wifi: state: assoc -> run (10)
I (394625) wifi: connected with devolo-f4068d73a03e, channel 11
I (394665) esp32wifi: WiFi UP with SSID: devolo-f4068d73a03e, MAC: 30:ae:a4:37:25:88, IP: 192.168.2.101, mask: 255.255.255.0, gw: 192.168.2.1
I (394665) telnet: Launching Telnet Server
I (397615) wifi: pm start, type:0
OVMS > module memory
Free 8-bit 89700/286352, 32-bit 17972/45144, SPIRAM 0/0
--Task-- Total DRAM D/IRAM IRAM SPIRAM +/- DRAM D/IRAM IRAM SPIRAM
tiT 128 716 0 0 +0 +484 +0 +0
AsyncConsole 0 16552 26404 0 +0 +16356 +0 +0
NetManTask 8 488 0 0 +8 +488 +0 +0
wifi 0 1600 0 0 +0 +1600 +0 +0
eventTask 0 7564 0 0 +0 +7564 +0 +0
…but I'm not sure about that, haven't tested that in a while.
So, SD cards now work, and I'll not be able to use them due to the RAM usage… :(
Am 15.01.2018 um 19:21 schrieb Michael Balzer:
</pre>
<blockquote type="cite" class="">
<pre class="" wrap="">Transition went fine. "make flash" didn't even erase "/store", I had expected that to happen, good to know.
And…
OVMS > sd status
SD CARD is inserted
Name: SL32G
Type: SDHC/SDXC
Speed: default speed
Size: 30436MB
CSD: ver=1, sector_size=512, capacity=62333952 read_bl_len=9
SCR: sd_spec=2, bus_width=5
→ me too (the minion) :)
BUT… after reconfiguration to the same components as before, I'm now missing about 30-40 KB of free RAM.
After loading just the Twizy module & the v2 server, I'm now again down to…
OVMS > module memory
Free 8-bit 2632/286352, 32-bit 17972/45144, SPIRAM 0/0
…so it crashes as soon as it needs to actually do anything, like sending a notification.
This is without any of the new CAN logging stuff yet, that's stashed away for the transition.
I'll now check the config again for any more options to save RAM…
Regards,
Michael
Am 15.01.2018 um 06:48 schrieb Stephen Casner:
</pre>
<blockquote type="cite" class="">
<pre class="" wrap="">In order for the the "module memory" and "module tasks" commands to
work, the configuration needs to be changed from the sdk.default.hw30
that Mark just provided. CONFIG_FREERTOS_USE_TRACE_FACILITY needs to
be enabled, CONFIG_HEAP_POISONING must be enabled (LIGHT or
COMPREHENSIVE), and CONFIG_HEAP_TASK_TRACKING must be enabled. I have
attached a diff for the sdkconfig. That diff also includes a section
for enabling telnet, which some of you may be using.
Please also note that in this revised implementation of "module
memory" the block address is now the address that is returned from
malloc, not the address of the header that precedes it, and the length
of the block is now exclusive of the debugging overhead.
-- Steve
On Mon, 15 Jan 2018, Mark Webb-Johnson wrote:
</pre>
<blockquote type="cite" class="">
<pre class="" wrap="">All committed and pushed now.
Developers MUST now update their ESP IDF and XTENSA build tools to use this new build. They should also compare sdkconfig and sdkconfig.defaults.hw30 to verify differences. I also suggest you do a ‘make flash’ (rather than ‘make app-flash’) at least once, to update the bootloader to the latest (as bootloaders before v2.1 are no longer supported).
Check
<a class="moz-txt-link-freetext" href="https://esp-idf.readthedocs.io/en/latest/get-started/index.html#setup-toolchain" moz-do-not-send="true">https://esp-idf.readthedocs.io/en/latest/get-started/index.html#setup-toolchain</a> <a class="moz-txt-link-rfc2396E" href="https://esp-idf.readthedocs.io/en/latest/get-started/index.html#setup-toolchain" moz-do-not-send="true"><https://esp-idf.readthedocs.io/en/latest/get-started/index.html#setup-toolchain></a> <a class="moz-txt-link-rfc2396E" href="https://esp-idf.readthedocs.io/en/latest/get-started/index.html#setup-toolchain" moz-do-not-send="true"><https://esp-idf.readthedocs.io/en/latest/get-started/index.html#setup-toolchain></a> <a class="moz-txt-link-rfc2396E" href="https://esp-idf.readthedocs.io/en/latest/get-started/index.html#setup-toolchain" moz-do-not-send="true"><https://esp-idf.readthedocs.io/en/latest/get-started/index.html#setup-toolchain></a>
to see the version of XTENSA toolchain required for latest Espressif IDF ‘master’ builds. As of this writing, it is 1.22.0-80-g6c4433a-5.2.0.
I hope this goes smoothly for you.
Regards, Mark.
commit dfcc658557fc480bcccb09b23bc24399bb6e7497 (HEAD -> master, origin/master, origin/HEAD)
Author: Mark Webb-Johnson <a class="moz-txt-link-rfc2396E" href="mailto:mark@webb-johnson.net" moz-do-not-send="true"><mark@webb-johnson.net></a> <a class="moz-txt-link-rfc2396E" href="mailto:mark@webb-johnson.net" moz-do-not-send="true"><mailto:mark@webb-johnson.net></a>
Date: Mon Jan 15 07:56:45 2018 +0800
Provide a sdkconfig.default.hw31 for OVMS v3.1 hardware
commit 003592d553c881f735fb228b08836a13c306cec3
Merge: e58c5b6 b28db5e
Author: Mark Webb-Johnson <a class="moz-txt-link-rfc2396E" href="mailto:mark@webb-johnson.net" moz-do-not-send="true"><mark@webb-johnson.net></a> <a class="moz-txt-link-rfc2396E" href="mailto:mark@webb-johnson.net" moz-do-not-send="true"><mailto:mark@webb-johnson.net></a>
Date: Mon Jan 15 07:49:13 2018 +0800
Merge branch 'for-master'. This requires ESP-IDF v3.0 support:
OVMS developers should now:
1] Pull the latest OpenVehicles IDF, and checkout MASTER branch.
2] Update XTENSA tools to match version required by Espressif for MASTER branch.
3] For ovms hardware v3.0, a sdkconfig default file sdkconfig.default.hw30 has
been provided. That can be merged/copied to sdkconfig as appropriate.
4] For ovms hardware v3.1, a sdkconfig default file sdkconfig.default.hw31 will
been provided in the next update.
5] It is recommended that developers perform at least one full 'make flash'
with this version, to update the bootloader to latest. Note that the
sdkconfig.default.* files are now set to require bootloader at least v2.1
(or later), and bootloader v2.0 is no longer supported.
Enjoy.
</pre>
<blockquote type="cite" class="">
<pre class="" wrap="">On 15 Jan 2018, at 7:25 AM, Mark Webb-Johnson <a class="moz-txt-link-rfc2396E" href="mailto:mark@webb-johnson.net" moz-do-not-send="true"><mark@webb-johnson.net></a> <a class="moz-txt-link-rfc2396E" href="mailto:mark@webb-johnson.net" moz-do-not-send="true"><mailto:mark@webb-johnson.net></a> wrote:
Merge is ok, but triple checking a couple of things. Should be committed and pushed within the next half hour.
Regards, Mark
</pre>
<blockquote type="cite" class="">
<pre class="" wrap="">On 15 Jan 2018, at 1:09 AM, Stephen Casner <a class="moz-txt-link-rfc2396E" href="mailto:casner@acm.org" moz-do-not-send="true"><casner@acm.org></a> <a class="moz-txt-link-rfc2396E" href="mailto:casner@acm.org" moz-do-not-send="true"><mailto:casner@acm.org></a> wrote:
Mark,
It looks like you were not able to do the sdkconfig.default and merge
as you planned?
-- Steve
</pre>
<blockquote type="cite" class="">
<pre class="" wrap="">On Fri, 12 Jan 2018, Stephen Casner wrote:
</pre>
<blockquote type="cite"
class="">
<pre class="" wrap="">On Sat, 13 Jan 2018, Mark Webb-Johnson wrote:
@Steve can you update our master clone to latest from Espressif and
make sure your stuff is still ok?
</pre>
</blockquote>
<pre class="" wrap="">I have just now done this. I had already done a rebase a few days ago
before committing the improved version of the OS changes so I could
issue a pull request. There were a few commits since then, which I
have now merged. My code still runs correctly.
</pre>
<blockquote type="cite"
class="">
<pre class="" wrap="">I guess steps for developers will be:
1) pull the openvehicles IDF and switch to master branch. Sub module update.
2) download and install xtensa build chain to match.
3) update OVMS master, make clean, check menu config, then build and play.
</pre>
</blockquote>
<pre class="" wrap="">Sounds right.
</pre>
<blockquote type="cite"
class="">
<pre class="" wrap="">I can get my part done by Sunday 14th night (HKT), so suggest to do
the Merge of the OVMS firmware master branch then.
</pre>
</blockquote>
<pre class="" wrap="">I'll be sleeping then, so you can go ahead and do the merge.
-- Steve
</pre>
</blockquote>
<pre class="" wrap="">_______________________________________________
OvmsDev mailing list
<a class="moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.teslaclub.hk" moz-do-not-send="true">OvmsDev@lists.teslaclub.hk</a> <a class="moz-txt-link-rfc2396E" href="mailto:OvmsDev@lists.teslaclub.hk" moz-do-not-send="true"><mailto:OvmsDev@lists.teslaclub.hk></a>
<a class="moz-txt-link-freetext" href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev" moz-do-not-send="true">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a> <a class="moz-txt-link-rfc2396E" href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev" moz-do-not-send="true"><http://lists.teslaclub.hk/mailman/listinfo/ovmsdev></a>
</pre>
</blockquote>
<pre class="" wrap="">_______________________________________________
OvmsDev mailing list
<a class="moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.teslaclub.hk" moz-do-not-send="true">OvmsDev@lists.teslaclub.hk</a> <a class="moz-txt-link-rfc2396E" href="mailto:OvmsDev@lists.teslaclub.hk" moz-do-not-send="true"><mailto:OvmsDev@lists.teslaclub.hk></a>
<a class="moz-txt-link-freetext" href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev" moz-do-not-send="true">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a> <a class="moz-txt-link-rfc2396E" href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev" moz-do-not-send="true"><http://lists.teslaclub.hk/mailman/listinfo/ovmsdev></a>
</pre>
</blockquote>
</blockquote>
<pre class="" wrap="">_______________________________________________
OvmsDev mailing list
<a class="moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.teslaclub.hk" moz-do-not-send="true">OvmsDev@lists.teslaclub.hk</a> <a class="moz-txt-link-rfc2396E" href="mailto:OvmsDev@lists.teslaclub.hk" moz-do-not-send="true"><mailto:OvmsDev@lists.teslaclub.hk></a>
<a class="moz-txt-link-freetext" href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev" moz-do-not-send="true">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a> <a class="moz-txt-link-rfc2396E" href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev" moz-do-not-send="true"><http://lists.teslaclub.hk/mailman/listinfo/ovmsdev></a>
</pre>
</blockquote>
<pre class="" wrap="">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
_______________________________________________
OvmsDev mailing list
<a class="moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.teslaclub.hk" moz-do-not-send="true">OvmsDev@lists.teslaclub.hk</a> <a class="moz-txt-link-rfc2396E" href="mailto:OvmsDev@lists.teslaclub.hk" moz-do-not-send="true"><mailto:OvmsDev@lists.teslaclub.hk></a>
<a class="moz-txt-link-freetext" href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev" moz-do-not-send="true">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a> <a class="moz-txt-link-rfc2396E" href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev" moz-do-not-send="true"><http://lists.teslaclub.hk/mailman/listinfo/ovmsdev></a>
</pre>
</blockquote>
<pre class="" wrap="">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
_______________________________________________
OvmsDev mailing list
<a class="moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.teslaclub.hk" moz-do-not-send="true">OvmsDev@lists.teslaclub.hk</a>
<a class="moz-txt-link-freetext" href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev" moz-do-not-send="true">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br class="">
<fieldset class="mimeAttachmentHeader"></fieldset>
<br class="">
<pre class="" wrap="">_______________________________________________
OvmsDev mailing list
<a class="moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.teslaclub.hk" moz-do-not-send="true">OvmsDev@lists.teslaclub.hk</a>
<a class="moz-txt-link-freetext" href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev" moz-do-not-send="true">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br class="">
<pre class="moz-signature" cols="160">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
</div>
_______________________________________________<br
class="">
OvmsDev mailing list<br class="">
<a href="mailto:OvmsDev@lists.teslaclub.hk"
class="" moz-do-not-send="true">OvmsDev@lists.teslaclub.hk</a><br
class="">
<a
href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev"
class="" moz-do-not-send="true">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a><br
class="">
</div>
</blockquote>
</div>
<br class="">
</div>
</div>
_______________________________________________<br
class="">
OvmsDev mailing list<br class="">
<a href="mailto:OvmsDev@lists.teslaclub.hk" class=""
moz-do-not-send="true">OvmsDev@lists.teslaclub.hk</a><br
class="">
<a class="moz-txt-link-freetext" href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a><br
class="">
</div>
</blockquote>
</div>
<br class="">
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
OvmsDev mailing list
<a class="moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.teslaclub.hk">OvmsDev@lists.teslaclub.hk</a>
<a class="moz-txt-link-freetext" href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br>
<pre class="moz-signature" cols="160">--
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
</pre>
</body>
</html>