<div dir="ltr">Hi All, <div><br></div><div>Does anyone know the details of how, most reliably and most quickly, to get a location fix from the GPS module after it has been powered up and after it has come out of sleep mode?</div><div><br></div><div>I have written my own code using the OVMS hardware. To save power, it turns off the GPS power (AT+CGPSPWR=0) and puts the module to sleep (AT+CSCLK=2) while the vehicle is parked (i.e. no CAN bus activity). Once there is CAN activity again, it comes out of sleep mode (AT+CSCLK=0) and turns on the GPS (AT+CGSPPWR=1). Immediately after turning on the GPS power, I also issue one of the GPS reset commands (AT+CGPSRS=0 or AT+CGPSRST=1).</div><div><br></div><div>The module documentation if vague about when to use the 0 reset or the 1 reset.</div><div><br></div><div>I know that the GPS module itself isn't made to function while the module is asleep even though the commands may not give an error. </div><div><br></div><div>I've read that it takes up to 15 minutes to get a fix on most GPS devices. In practice, sometimes I get a fix within a minute every time I start up, and other times I don't get a fix even after hours of trying with either reset option. </div><div><br></div><div>Any information will be greatly appreciated.</div><div><br></div><div>Thanks,</div><div>Arthur</div></div>