<html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns:m="http://schemas.microsoft.com/office/2004/12/omml" xmlns="http://www.w3.org/TR/REC-html40"><head><meta http-equiv=Content-Type content="text/html; charset=utf-8"><meta name=Generator content="Microsoft Word 12 (filtered medium)"><style><!--
/* Font Definitions */
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:Tahoma;
panose-1:2 11 6 4 3 5 4 4 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman","serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
p
{mso-style-priority:99;
mso-margin-top-alt:auto;
margin-right:0cm;
mso-margin-bottom-alt:auto;
margin-left:0cm;
font-size:12.0pt;
font-family:"Times New Roman","serif";}
p.MsoAcetate, li.MsoAcetate, div.MsoAcetate
{mso-style-priority:99;
mso-style-link:"Bobletekst Tegn";
margin:0cm;
margin-bottom:.0001pt;
font-size:8.0pt;
font-family:"Tahoma","sans-serif";}
span.BobletekstTegn
{mso-style-name:"Bobletekst Tegn";
mso-style-priority:99;
mso-style-link:Bobletekst;
font-family:"Tahoma","sans-serif";}
span.EpostStil20
{mso-style-type:personal;
font-family:"Calibri","sans-serif";
color:#1F497D;}
span.EpostStil21
{mso-style-type:personal-reply;
font-family:"Calibri","sans-serif";
color:#1F497D;}
.MsoChpDefault
{mso-style-type:export-only;
font-size:10.0pt;}
@page WordSection1
{size:612.0pt 792.0pt;
margin:70.85pt 70.85pt 70.85pt 70.85pt;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]--></head><body lang=NO-BOK link=blue vlink=purple><div class=WordSection1><p class=MsoNormal><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>Found the answer to one of my questions...<o:p></o:p></span></p><p class=MsoNormal><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><o:p> </o:p></span></p><p class=MsoNormal><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>The relays pins are active low.<o:p></o:p></span></p><p class=MsoNormal><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><o:p> </o:p></span></p><p class=MsoNormal><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>http://arduino-info.wikispaces.com/ArduinoPower#OI<o:p></o:p></span></p><p class=MsoNormal><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><o:p> </o:p></span></p><div><div style='border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0cm 0cm 0cm'><p class=MsoNormal><b><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'>Fra:</span></b><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'> ovmsdev-bounces@lists.teslaclub.hk [mailto:ovmsdev-bounces@lists.teslaclub.hk] <b>På vegne av</b> Olav A. Antonsen<br><b>Sendt:</b> 26. juni 2014 01:55<br><b>Til:</b> 'OVMS Developers'<br><b>Emne:</b> Re: [Ovmsdev] OVMS - HW<o:p></o:p></span></p></div></div><p class=MsoNormal><o:p> </o:p></p><p class=MsoNormal><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>The 7805 gets too hot to touch when running with only one relay closed, so I definitely need to add an external source to the relay module. I'm assuming I can connect the external power source to the 3-pin connector using the JDVcc and Gnd pins?<o:p></o:p></span></p><p class=MsoNormal><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><o:p> </o:p></span></p><p class=MsoNormal><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>Does anyone know if it needs to be +5V? Can I supply the relay board with 12V?<o:p></o:p></span></p><p class=MsoNormal><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><o:p> </o:p></span></p><p class=MsoNormal><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>Another thing I don't understand is the fact that when the OVMS output port i low (0) the relay closes. When I set the output port to 1 the relay opens.<o:p></o:p></span></p><p class=MsoNormal><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><o:p> </o:p></span></p><p class=MsoNormal><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>Looking at the closeup of the relay module, do I need to supply the Vcc pin with +5V on the 4-pin connector?<o:p></o:p></span></p><p class=MsoNormal><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><o:p> </o:p></span></p><p class=MsoNormal><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>Regards,<o:p></o:p></span></p><p class=MsoNormal><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>Olav<o:p></o:p></span></p><p class=MsoNormal><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><o:p> </o:p></span></p><div style='border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0cm 0cm 0cm'><p class=MsoNormal><b><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'>Fra:</span></b><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'> <a href="mailto:ovmsdev-bounces@lists.teslaclub.hk">ovmsdev-bounces@lists.teslaclub.hk</a> [<a href="mailto:ovmsdev-bounces@lists.teslaclub.hk">mailto:ovmsdev-bounces@lists.teslaclub.hk</a>] <b>På vegne av</b> Thomas Bergo<br><b>Sendt:</b> 18. juni 2014 04:16<br><b>Til:</b> OVMS Developers<br><b>Emne:</b> Re: [Ovmsdev] OVMS - HW<o:p></o:p></span></p></div><p class=MsoNormal><o:p> </o:p></p><div><p class=MsoNormal>Hi Olav <o:p></o:p></p><div><p class=MsoNormal><o:p> </o:p></p></div><div><p class=MsoNormal>Why don't do it easy and use a MOSFET and a 12V relay. Then you don't need to worry about heat and 5V power consumption.<o:p></o:p></p></div><div><p class=MsoNormal>See attached picture sample circuit. You should probably also add a resistor from the output of the PIC to GND to make sure the relay is turn properly off.<o:p></o:p></p></div><div><p class=MsoNormal><o:p> </o:p></p></div><div><p class=MsoNormal>Regards, Thomas <o:p></o:p></p></div><div><p class=MsoNormal><o:p> </o:p></p></div><div><p class=MsoNormal><o:p> </o:p></p></div></div><div><p class=MsoNormal style='margin-bottom:12.0pt'><o:p> </o:p></p><div><p class=MsoNormal>2014-06-17 10:04 GMT+02:00 Olav A. Antonsen <<a href="mailto:olav@ansit.no" target="_blank">olav@ansit.no</a>>:<o:p></o:p></p><div><div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>Seems like most car phone chargers uses a MC34063 switchmode-regulator chip that is much more efficient than a 7805. Will strip one out of its casing and give it a try.</span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>For stronger currents I was told to use a UBEC.</span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>--Olav</span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><b><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif"'>From:</span></b><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif"'> <a href="mailto:ovmsdev-bounces@lists.teslaclub.hk" target="_blank">ovmsdev-bounces@lists.teslaclub.hk</a> [mailto:<a href="mailto:ovmsdev-bounces@lists.teslaclub.hk" target="_blank">ovmsdev-bounces@lists.teslaclub.hk</a>] <b>On Behalf Of </b>Mastro Gippo<br><b>Sent:</b> 17. juni 2014 09:38</span><span lang=EN-US><o:p></o:p></span></p><div><div><p class=MsoNormal><span lang=EN-US><br><b>To:</b> OVMS Developers<br><b>Subject:</b> Re: [Ovmsdev] OVMS - HW<o:p></o:p></span></p></div></div><div><div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US> <o:p></o:p></span></p><div><div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US>Olav, the temperature should not raise that much, as the PCB is dissipating some of the heat. You can just try it and see if it heats up too much (being careful not to blow the fuse, as Mark said), or use your own 7805 slapped to a small heatsink. If you need more power, a car phone charger may be a better choice as it has a more efficient switching supply.<o:p></o:p></span></p></div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US>MG<o:p></o:p></span></p></div><div><p class=MsoNormal style='mso-margin-top-alt:auto;margin-bottom:12.0pt'><span lang=EN-US> <o:p></o:p></span></p><div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US>2014-06-17 8:44 GMT+02:00 Olav A. Antonsen <<a href="mailto:olav@ansit.no" target="_blank">olav@ansit.no</a>>:<o:p></o:p></span></p><blockquote style='border:none;border-left:solid #CCCCCC 1.0pt;padding:0cm 0cm 0cm 6.0pt;margin-left:4.8pt;margin-top:5.0pt;margin-right:0cm;margin-bottom:5.0pt'><div><div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US>100°C/W! 9V * 0.2A = 1.8W => I need to keep the relays closed for 1 hour so it’s going to overheat!<o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US> <o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US>Need to find another solution for feeding the relay module with +5V.<o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US> <o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US>Mastro, any suggestions?<o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US> <o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US>--Olav<o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US> <o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US> <o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><b><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif"'>From:</span></b><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif"'> <a href="mailto:ovmsdev-bounces@lists.teslaclub.hk" target="_blank">ovmsdev-bounces@lists.teslaclub.hk</a> [mailto:<a href="mailto:ovmsdev-bounces@lists.teslaclub.hk" target="_blank">ovmsdev-bounces@lists.teslaclub.hk</a>] <b>On Behalf Of </b>Mastro Gippo<br><b>Sent:</b> 17. juni 2014 00:33<br><b>To:</b> OVMS Developers<br><b>Subject:</b> Re: [Ovmsdev] OVMS - HW</span><span lang=EN-US><o:p></o:p></span></p><div><div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US> <o:p></o:p></span></p><div><div><div><div><div><div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US>Hi, this is the correct DS: <a href="http://www.st.com/web/en/resource/technical/document/datasheet/CD00000444.pdf" target="_blank">http://www.st.com/web/en/resource/technical/document/datasheet/CD00000444.pdf</a><o:p></o:p></span></p></div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US>for the DPAK package the OVMS is using, you have 8°C/W for the TJ and 100°C/W for TA. (it's a small package!)<o:p></o:p></span></p></div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US>Also, you must calc the dissipation thinking about the "dissipated" voltage, so not 5V but (14V-5V) = 9V (worst case).<o:p></o:p></span></p></div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US>You should also add some margin, e.g. use 100mA instead of 80mA just to be safe.<o:p></o:p></span></p></div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US>Just try it and keep a finger on the IC for a few minutes to see if it overheats, it shouldn't hurt the board.<o:p></o:p></span></p></div><div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US> <o:p></o:p></span></p></div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US>MG<o:p></o:p></span></p></div><div><p class=MsoNormal style='mso-margin-top-alt:auto;margin-bottom:12.0pt'><span lang=EN-US> <o:p></o:p></span></p><div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US>2014-06-17 0:14 GMT+02:00 Olav A. Antonsen <<a href="mailto:olav@ansit.no" target="_blank">olav@ansit.no</a>>:<o:p></o:p></span></p><blockquote style='border:none;border-left:solid #CCCCCC 1.0pt;padding:0cm 0cm 0cm 6.0pt;margin-left:4.8pt;margin-top:5.0pt;margin-right:0cm;margin-bottom:5.0pt'><div><div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>Great video thermal design.</span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>My knowledge on thermal design is only 30 minutes old, but my interpretation of the datasheet gives med</span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>The regulator will reach 23°C/W above ambient. </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>Running at max 1.5A @ 5V = 7.5W.</span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>23C/W => 172.5°C -> To hot to handle</span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>2 relays @ 80mA each ~ 0.16A @ 5V ~ 0,8W ~ 18.4°C above ambient. </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>My conclusion is that adding a consumption of 160mA will raise the temperature 18.4°C above ambient. (This comes in addition to the current the OVMS module consumes.</span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>)</span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>Is this correct?</span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>Regards</span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>Olav</span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p><div style='border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0cm 0cm 0cm'><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><b><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'>Fra:</span></b><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'> <a href="mailto:ovmsdev-bounces@lists.teslaclub.hk" target="_blank">ovmsdev-bounces@lists.teslaclub.hk</a> [mailto:<a href="mailto:ovmsdev-bounces@lists.teslaclub.hk" target="_blank">ovmsdev-bounces@lists.teslaclub.hk</a>] <b>På vegne av</b> Mastro Gippo<br><b>Sendt:</b> 16. juni 2014 23:38</span><span lang=EN-US><o:p></o:p></span></p><div><div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><br><b>Til:</b> OVMS Developers<br><b>Emne:</b> Re: [Ovmsdev] OVMS - HW<span lang=EN-US><o:p></o:p></span></p></div></div></div><div><div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'> <span lang=EN-US><o:p></o:p></span></p><div><div><div><div><div><div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'>The 1.5A is not the whole story; you can watch this: <a href="https://www.youtube.com/watch?v=8ruFVmxf0zs" target="_blank">https://www.youtube.com/watch?v=8ruFVmxf0zs</a><span lang=EN-US><o:p></o:p></span></p></div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'>Basically, if you had that 7805 on free air powering your two relays, it would (try to) reach about 170°C above ambient temperature. The PCB is a nice heatsink, but it is shared with the big GSM regulator, and that rises the temperature too.<span lang=EN-US><o:p></o:p></span></p></div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'>By all means, experiment!! The 7805 has thermal protection, and you should test your circuit on the bench keeping a finger on the IC to feel if it gets too hot.<span lang=EN-US><o:p></o:p></span></p></div><p class=MsoNormal style='mso-margin-top-alt:auto;margin-bottom:12.0pt'>You should take care of the increased ripple too, but a small cap should do the trick there.<span lang=EN-US><o:p></o:p></span></p></div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'>Regards<span lang=EN-US><o:p></o:p></span></p></div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'>MG<span lang=EN-US><o:p></o:p></span></p></div><div><p class=MsoNormal style='mso-margin-top-alt:auto;margin-bottom:12.0pt'> <span lang=EN-US><o:p></o:p></span></p><div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'>2014-06-16 23:09 GMT+02:00 Olav A. Antonsen <<a href="mailto:olav@ansit.no" target="_blank">olav@ansit.no</a>>:<span lang=EN-US><o:p></o:p></span></p><div><div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>I got some help from a user on a Norwegian forum who pointed me to </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><a href="https://raw.githubusercontent.com/openvehicles/Open-Vehicle-Monitoring-System/master/vehicle/Car%20Module/v2-base/OVMS_V6A.pdf" target="_blank"><span style='color:#1F497D;text-decoration:none'>https://raw.githubusercontent.com/openvehicles/Open-Vehicle-Monitoring-System/master/vehicle/Car%20Module/v2-base/OVMS_V6A.pdf</span></a></span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>Looks like a 7805-regulator is supplying the OVMS module with +5V @ 1.5A max.</span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><a href="https://www.sparkfun.com/datasheets/Components/LM7805.pdf" target="_blank">https://www.sparkfun.com/datasheets/Components/LM7805.pdf</a></span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>80mA won't be a problem then.</span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>--Olav</span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p><div style='border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0cm 0cm 0cm'><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><b><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'>Fra:</span></b><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'> <a href="mailto:ovmsdev-bounces@lists.teslaclub.hk" target="_blank">ovmsdev-bounces@lists.teslaclub.hk</a> [mailto:<a href="mailto:ovmsdev-bounces@lists.teslaclub.hk" target="_blank">ovmsdev-bounces@lists.teslaclub.hk</a>] <b>På vegne av</b> Mastro Gippo<br><b>Sendt:</b> 16. juni 2014 23:03<br><b>Til:</b> OVMS Developers<br><b>Emne:</b> Re: [Ovmsdev] OVMS - HW</span><span lang=EN-US><o:p></o:p></span></p></div><div><div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'> <span lang=EN-US><o:p></o:p></span></p><div><div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'>It may be a problem to get the 5V from the output of the regulator, but the nice thing about that module is that it is isolated; you can connect your own power supply and be 100% safe. These relays draw about 80mA each (just tested them, I have the same product at home), so if you turn them on one at a time and for short periods of time it should be ok (I don't know a lot about the termal design of the OVMS).<span lang=EN-US><o:p></o:p></span></p></div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'>MG<span lang=EN-US><o:p></o:p></span></p></div><div><p class=MsoNormal style='mso-margin-top-alt:auto;margin-bottom:12.0pt'> <span lang=EN-US><o:p></o:p></span></p><div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'>2014-06-16 22:37 GMT+02:00 Olav A. Antonsen <<a href="mailto:olav@ansit.no" target="_blank">olav@ansit.no</a>>:<span lang=EN-US><o:p></o:p></span></p><div><div><div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>Hello</span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>My knowledge of electronics is limited.</span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>As far as I understand the OVMS module is supplied with +12V via the OBD connector. What I don't understand is where the +5V comes from? </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><a href="https://github.com/openvehicles/Open-Vehicle-Monitoring-System/blob/master/vehicle/Car%20Module/v2-base/20120814-boarddesign.pdf" target="_blank">https://github.com/openvehicles/Open-Vehicle-Monitoring-System/blob/master/vehicle/Car%20Module/v2-base/20120814-boarddesign.pdf</a></span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>I'm currently trying to control a relay using the RC3 output on the PIC18F2580 as a control signal to a rely on a relay module</span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><a href="http://www.dx.com/p/arduino-2-channel-relay-shield-module-red-144140#.U59Qavl_t8E" target="_blank">http://www.dx.com/p/arduino-2-channel-relay-shield-module-red-144140#.U59Qavl_t8E</a>.</span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>The relay module needs to be supplied with +5V to drive the relays, and my plan was to get the +5V from the OVMS module using pin 13 on the HEADER 9X2.</span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>But I'm afraid I might blow something on the OVMS module if the relay module draws to many mA.</span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>Any advice would be appreciated.</span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>--Olav</span><span lang=EN-US><o:p></o:p></span></p><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><span lang=EN-US><o:p></o:p></span></p></div></div></div><p class=MsoNormal style='mso-margin-top-alt:auto;margin-bottom:12.0pt'><br>_______________________________________________<br>OvmsDev mailing list<br><a href="mailto:OvmsDev@lists.teslaclub.hk" target="_blank">OvmsDev@lists.teslaclub.hk</a><br><a href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev" target="_blank">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a><span lang=EN-US><o:p></o:p></span></p></div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'> <span lang=EN-US><o:p></o:p></span></p></div></div></div></div></div><p class=MsoNormal style='mso-margin-top-alt:auto;margin-bottom:12.0pt'><br>_______________________________________________<br>OvmsDev mailing list<br><a href="mailto:OvmsDev@lists.teslaclub.hk" target="_blank">OvmsDev@lists.teslaclub.hk</a><br><a href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev" target="_blank">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a><span lang=EN-US><o:p></o:p></span></p></div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'> <span lang=EN-US><o:p></o:p></span></p></div></div></div></div></div><p class=MsoNormal style='mso-margin-top-alt:auto;margin-bottom:12.0pt'><span lang=EN-US><br>_______________________________________________<br>OvmsDev mailing list<br><a href="mailto:OvmsDev@lists.teslaclub.hk" target="_blank">OvmsDev@lists.teslaclub.hk</a><br><a href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev" target="_blank">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a><o:p></o:p></span></p></blockquote></div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US> <o:p></o:p></span></p></div></div></div></div></div><p class=MsoNormal style='mso-margin-top-alt:auto;margin-bottom:12.0pt'><span lang=EN-US><br>_______________________________________________<br>OvmsDev mailing list<br><a href="mailto:OvmsDev@lists.teslaclub.hk" target="_blank">OvmsDev@lists.teslaclub.hk</a><br><a href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev" target="_blank">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a><o:p></o:p></span></p></blockquote></div><p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span lang=EN-US> <o:p></o:p></span></p></div></div></div></div></div><p class=MsoNormal style='margin-bottom:12.0pt'><br>_______________________________________________<br>OvmsDev mailing list<br><a href="mailto:OvmsDev@lists.teslaclub.hk">OvmsDev@lists.teslaclub.hk</a><br><a href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev" target="_blank">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a><o:p></o:p></p></div><p class=MsoNormal><o:p> </o:p></p></div></div></body></html>