<div dir="ltr"><div>Olav, the temperature should not raise that much, as the PCB is dissipating some of the heat. You can just try it and see if it heats up too much (being careful not to blow the fuse, as Mark said), or use your own 7805 slapped to a small heatsink. If you need more power, a car phone charger may be a better choice as it has a more efficient switching supply.<br>

</div>MG<br></div><div class="gmail_extra"><br><br><div class="gmail_quote">2014-06-17 8:44 GMT+02:00 Olav A. Antonsen <span dir="ltr"><<a href="mailto:olav@ansit.no" target="_blank">olav@ansit.no</a>></span>:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">

<div link="blue" vlink="purple" lang="EN-US"><div><p class="MsoNormal">100°C/W!  9V * 0.2A = 1.8W => I need to keep the relays closed for 1 hour so it’s going to overheat!<u></u><u></u></p><p class="MsoNormal"><u></u> <u></u></p>

<p class="MsoNormal">Need to find another solution for feeding the relay module with +5V.<span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u><u></u></span></p><p class="MsoNormal">

<u></u> <u></u></p><p class="MsoNormal">Mastro, any suggestions?<u></u><u></u></p><p class="MsoNormal"><u></u> <u></u></p><p class="MsoNormal">--Olav<u></u><u></u></p><p class="MsoNormal"><u></u> <u></u></p><p class="MsoNormal">

<u></u> <u></u></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p><p class="MsoNormal"><b><span style="font-size:11.0pt;font-family:"Calibri","sans-serif"">From:</span></b><span style="font-size:11.0pt;font-family:"Calibri","sans-serif""> <a href="mailto:ovmsdev-bounces@lists.teslaclub.hk" target="_blank">ovmsdev-bounces@lists.teslaclub.hk</a> [mailto:<a href="mailto:ovmsdev-bounces@lists.teslaclub.hk" target="_blank">ovmsdev-bounces@lists.teslaclub.hk</a>] <b>On Behalf Of </b>Mastro Gippo<br>

<b>Sent:</b> 17. juni 2014 00:33<br><b>To:</b> OVMS Developers<br><b>Subject:</b> Re: [Ovmsdev] OVMS - HW<u></u><u></u></span></p><div><div class="h5"><p class="MsoNormal"><u></u> <u></u></p><div><div><div><div><div><div>

<p class="MsoNormal">Hi, this is the correct DS: <a href="http://www.st.com/web/en/resource/technical/document/datasheet/CD00000444.pdf" target="_blank">http://www.st.com/web/en/resource/technical/document/datasheet/CD00000444.pdf</a><u></u><u></u></p>

</div><p class="MsoNormal">for the DPAK package the OVMS is using, you have 8°C/W for the TJ and 100°C/W for TA. (it's a small package!)<u></u><u></u></p></div><p class="MsoNormal">Also, you must calc the dissipation thinking about the "dissipated" voltage, so not 5V but (14V-5V) = 9V (worst case).<u></u><u></u></p>

</div><p class="MsoNormal">You should also add some margin, e.g. use 100mA instead of 80mA just to be safe.<u></u><u></u></p></div><p class="MsoNormal">Just try it and keep a finger on the IC for a few minutes to see if it overheats, it shouldn't hurt the board.<u></u><u></u></p>

</div><div><p class="MsoNormal"><u></u> <u></u></p></div><p class="MsoNormal">MG<u></u><u></u></p></div><div><p class="MsoNormal" style="margin-bottom:12.0pt"><u></u> <u></u></p><div><p class="MsoNormal">2014-06-17 0:14 GMT+02:00 Olav A. Antonsen <<a href="mailto:olav@ansit.no" target="_blank">olav@ansit.no</a>>:<u></u><u></u></p>

<blockquote style="border:none;border-left:solid #cccccc 1.0pt;padding:0cm 0cm 0cm 6.0pt;margin-left:4.8pt;margin-right:0cm"><div><div><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Great video thermal design.</span><span lang="NO-BOK"><u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><span lang="NO-BOK"><u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">My knowledge on thermal design is only 30 minutes old, but my interpretation of the datasheet gives med</span><span lang="NO-BOK"><u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><span lang="NO-BOK"><u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">The regulator will reach 23°C/W above ambient. </span><span lang="NO-BOK"><u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><span lang="NO-BOK"><u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Running at max 1.5A @ 5V =  7.5W.</span><span lang="NO-BOK"><u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><span lang="NO-BOK"><u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">23C/W => 172.5°C -> To hot to handle</span><span lang="NO-BOK"><u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><span lang="NO-BOK"><u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">2 relays @ 80mA each ~ 0.16A @ 5V ~ 0,8W ~ 18.4°C above ambient. </span><span lang="NO-BOK"><u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><span lang="NO-BOK"><u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">My conclusion is that adding a consumption of 160mA will raise the temperature 18.4°C above ambient. (This comes in addition to the current the OVMS module consumes.</span><span lang="NO-BOK"><u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">)</span><span lang="NO-BOK"><u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><span lang="NO-BOK"><u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Is this correct?</span><span lang="NO-BOK"><u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><span lang="NO-BOK"><u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Regards</span><span lang="NO-BOK"><u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Olav</span><span lang="NO-BOK"><u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><span lang="NO-BOK"><u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><span lang="NO-BOK"><u></u><u></u></span></p>

<div style="border:none;border-top:solid #b5c4df 1.0pt;padding:3.0pt 0cm 0cm 0cm"><p class="MsoNormal"><b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif"" lang="NO-BOK">Fra:</span></b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif"" lang="NO-BOK"> <a href="mailto:ovmsdev-bounces@lists.teslaclub.hk" target="_blank">ovmsdev-bounces@lists.teslaclub.hk</a> [mailto:<a href="mailto:ovmsdev-bounces@lists.teslaclub.hk" target="_blank">ovmsdev-bounces@lists.teslaclub.hk</a>] <b>På vegne av</b> Mastro Gippo<br>

<b>Sendt:</b> 16. juni 2014 23:38</span><span lang="NO-BOK"><u></u><u></u></span></p><div><div><p class="MsoNormal"><span lang="NO-BOK"><br><b>Til:</b> OVMS Developers<br><b>Emne:</b> Re: [Ovmsdev] OVMS - HW<u></u><u></u></span></p>

</div></div></div><div><div><p class="MsoNormal"><span lang="NO-BOK"> <u></u><u></u></span></p><div><div><div><div><div><div><p class="MsoNormal"><span lang="NO-BOK">The 1.5A is not the whole story; you can watch this: <a href="https://www.youtube.com/watch?v=8ruFVmxf0zs" target="_blank">https://www.youtube.com/watch?v=8ruFVmxf0zs</a><u></u><u></u></span></p>

</div><p class="MsoNormal"><span lang="NO-BOK">Basically, if you had that 7805 on free air powering your two relays, it would (try to) reach about 170°C above ambient temperature. The PCB is a nice heatsink, but it is shared with the big GSM regulator, and that rises the temperature too.<u></u><u></u></span></p>

</div><p class="MsoNormal"><span lang="NO-BOK">By all means, experiment!! The 7805 has thermal protection, and you should test your circuit on the bench keeping a finger on the IC to feel if it gets too hot.<u></u><u></u></span></p>

</div><p class="MsoNormal" style="margin-bottom:12.0pt"><span lang="NO-BOK">You should take care of the increased ripple too, but a small cap should do the trick there.<u></u><u></u></span></p></div><p class="MsoNormal">
<span lang="NO-BOK">Regards<u></u><u></u></span></p>
</div><p class="MsoNormal"><span lang="NO-BOK">MG<u></u><u></u></span></p></div><div><p class="MsoNormal" style="margin-bottom:12.0pt"><span lang="NO-BOK"> <u></u><u></u></span></p><div><p class="MsoNormal"><span lang="NO-BOK">2014-06-16 23:09 GMT+02:00 Olav A. Antonsen <<a href="mailto:olav@ansit.no" target="_blank">olav@ansit.no</a>>:<u></u><u></u></span></p>

<div><div><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">I got some help from a user on a Norwegian forum who pointed me to </span><span lang="NO-BOK"><u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><span lang="NO-BOK"><u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><a href="https://raw.githubusercontent.com/openvehicles/Open-Vehicle-Monitoring-System/master/vehicle/Car%20Module/v2-base/OVMS_V6A.pdf" target="_blank"><span style="color:#1f497d;text-decoration:none">https://raw.githubusercontent.com/openvehicles/Open-Vehicle-Monitoring-System/master/vehicle/Car%20Module/v2-base/OVMS_V6A.pdf</span></a></span><span lang="NO-BOK"><u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><span lang="NO-BOK"><u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Looks like a 7805-regulator is supplying the OVMS module with +5V @ 1.5A max.</span><span lang="NO-BOK"><u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><span lang="NO-BOK"><u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><a href="https://www.sparkfun.com/datasheets/Components/LM7805.pdf" target="_blank">https://www.sparkfun.com/datasheets/Components/LM7805.pdf</a></span><span lang="NO-BOK"><u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><span lang="NO-BOK"><u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">80mA won't be a problem then.</span><span lang="NO-BOK"><u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><span lang="NO-BOK"><u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">--Olav</span><span lang="NO-BOK"><u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><span lang="NO-BOK"><u></u><u></u></span></p><div style="border:none;border-top:solid #b5c4df 1.0pt;padding:3.0pt 0cm 0cm 0cm">

<p class="MsoNormal"><b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif"" lang="NO-BOK">Fra:</span></b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif"" lang="NO-BOK"> <a href="mailto:ovmsdev-bounces@lists.teslaclub.hk" target="_blank">ovmsdev-bounces@lists.teslaclub.hk</a> [mailto:<a href="mailto:ovmsdev-bounces@lists.teslaclub.hk" target="_blank">ovmsdev-bounces@lists.teslaclub.hk</a>] <b>På vegne av</b> Mastro Gippo<br>

<b>Sendt:</b> 16. juni 2014 23:03<br><b>Til:</b> OVMS Developers<br><b>Emne:</b> Re: [Ovmsdev] OVMS - HW</span><span lang="NO-BOK"><u></u><u></u></span></p></div><div><div><p class="MsoNormal"><span lang="NO-BOK"> <u></u><u></u></span></p>

<div><div><p class="MsoNormal"><span lang="NO-BOK">It may be a problem to get the 5V from the output of the regulator, but the nice thing about that module is that it is isolated; you can connect your own power supply and be 100% safe. These relays draw about 80mA each (just tested them, I have the same product at home), so if you turn them on one at a time and for short periods of time it should be ok (I don't know a lot about the termal design of the OVMS).<u></u><u></u></span></p>

</div><p class="MsoNormal"><span lang="NO-BOK">MG<u></u><u></u></span></p></div><div><p class="MsoNormal" style="margin-bottom:12.0pt"><span lang="NO-BOK"> <u></u><u></u></span></p><div><p class="MsoNormal"><span lang="NO-BOK">2014-06-16 22:37 GMT+02:00 Olav A. Antonsen <<a href="mailto:olav@ansit.no" target="_blank">olav@ansit.no</a>>:<u></u><u></u></span></p>

<div><div><div><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d" lang="NO-BOK">Hello</span><span lang="NO-BOK"><u></u><u></u></span></p><p class="MsoNormal">

<span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d" lang="NO-BOK"> </span><span lang="NO-BOK"><u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">My knowledge of electronics is limited.</span><span lang="NO-BOK"><u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><span lang="NO-BOK"><u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">As far as I understand the OVMS module is supplied with +12V via the OBD connector. What I don't understand is where the +5V comes from? </span><span lang="NO-BOK"><u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><span lang="NO-BOK"><u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><a href="https://github.com/openvehicles/Open-Vehicle-Monitoring-System/blob/master/vehicle/Car%20Module/v2-base/20120814-boarddesign.pdf" target="_blank">https://github.com/openvehicles/Open-Vehicle-Monitoring-System/blob/master/vehicle/Car%20Module/v2-base/20120814-boarddesign.pdf</a></span><span lang="NO-BOK"><u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><span lang="NO-BOK"><u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">I'm currently trying to control a relay using the RC3 output on the PIC18F2580 as a control signal to a rely on a relay module</span><span lang="NO-BOK"><u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><span lang="NO-BOK"><u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><a href="http://www.dx.com/p/arduino-2-channel-relay-shield-module-red-144140#.U59Qavl_t8E" target="_blank">http://www.dx.com/p/arduino-2-channel-relay-shield-module-red-144140#.U59Qavl_t8E</a>.</span><span lang="NO-BOK"><u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><span lang="NO-BOK"><u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">The relay module needs to be supplied with +5V to drive the relays, and my plan was to get the +5V from the OVMS module using pin 13 on the HEADER 9X2.</span><span lang="NO-BOK"><u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><span lang="NO-BOK"><u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">But I'm afraid I might blow something on the OVMS module if the relay module draws to many mA.</span><span lang="NO-BOK"><u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><span lang="NO-BOK"><u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Any advice would be appreciated.</span><span lang="NO-BOK"><u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><span lang="NO-BOK"><u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">--Olav</span><span lang="NO-BOK"><u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span><span lang="NO-BOK"><u></u><u></u></span></p></div></div></div><p class="MsoNormal" style="margin-bottom:12.0pt">

<span lang="NO-BOK"><br>_______________________________________________<br>OvmsDev mailing list<br><a href="mailto:OvmsDev@lists.teslaclub.hk" target="_blank">OvmsDev@lists.teslaclub.hk</a><br><a href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev" target="_blank">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a><u></u><u></u></span></p>

</div><p class="MsoNormal"><span lang="NO-BOK"> <u></u><u></u></span></p></div></div></div></div></div><p class="MsoNormal" style="margin-bottom:12.0pt"><span lang="NO-BOK"><br>_______________________________________________<br>

OvmsDev mailing list<br><a href="mailto:OvmsDev@lists.teslaclub.hk" target="_blank">OvmsDev@lists.teslaclub.hk</a><br><a href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev" target="_blank">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a><u></u><u></u></span></p>

</div><p class="MsoNormal"><span lang="NO-BOK"> <u></u><u></u></span></p></div></div></div></div></div><p class="MsoNormal" style="margin-bottom:12.0pt"><br>_______________________________________________<br>OvmsDev mailing list<br>

<a href="mailto:OvmsDev@lists.teslaclub.hk" target="_blank">OvmsDev@lists.teslaclub.hk</a><br><a href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev" target="_blank">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a><u></u><u></u></p>

</blockquote></div><p class="MsoNormal"><u></u> <u></u></p></div></div></div></div></div><br>_______________________________________________<br>
OvmsDev mailing list<br>
<a href="mailto:OvmsDev@lists.teslaclub.hk">OvmsDev@lists.teslaclub.hk</a><br>
<a href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev" target="_blank">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a><br>
<br></blockquote></div><br></div>