Thomas,<div><br></div><div>That would be really useful. I am worried that the module may have failed.</div><div><br></div><div>I did not keep a copy of the last working hex file (lesson learned!) but did save the sources. Rebuilt from previous sources and loaded. It still fails.</div>
<div><br></div><div>Matt</div><div><br></div><div><br><br>On Monday, September 23, 2013, Thomas Bergo wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">
Matt:<div><br></div><div>I can send you the hex file i'm running in my OVMS module, so you can try if that woking in your module?</div><div><br></div><div>Regards, Thomas</div></div><div>
<br><br><div>2013/9/23 Thomas Bergo <span dir="ltr"><<a>thomas.bergo@gmail.com</a>></span><br><blockquote style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr">I did a rebuild from clean to ensure that i running the exact same code.<div>My OVMS module is booting as expected, and only the green led is blinking OK (one blink]</div><div><br></div><div>Which version of the OVMS FW are you running? I have only tested with the 2.5.2 FW.<br>
</div><div>Are there any significant changes from 2.5.2 that can impact the code to constantly reboot?</div><div><br></div><div><br></div><div><img><br>
</div><div><br></div><div>Regards, Thomas</div></div><div><div><div><br><br><div>2013/9/23 Matt Beard OVMS <span dir="ltr"><<a>smvo@mxf.org.uk</a>></span><br>
<blockquote style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div><div><div>OK - either this code is broken, or my OVMS is.<br><br></div>I flashed the code and set the unit up - no go, kept rebooting and the GPRS does not work.<br>
<br></div>Rebuild from clean. Reflashed, reloaded settings and still constant rebooting and GPRS does not work.<span><font color="#888888"><br>
<br></font></span></div><span><font color="#888888">Matt<br><br></font></span></div><div><div><div><br><br><div>On 23 September 2013 10:24, Thomas Bergo <span dir="ltr"><<a>thomas.bergo@gmail.com</a>></span> wrote:<br>
<blockquote style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div>Have tested and fixed a lot of errors this weekend. and i believe that the code is now in a state where it can be merged into the main project.<br>
</div><div><br></div><div>Have pushed a release 1.3 to my fork on GitHub.</div>
<div><br></div><div><div>Changes:</div><div>1.3 23.09.13 (Thomas)</div><div>- Fixed charging notification when battery is full, SOC=100%</div><div>- TODO: Fix battery temperature reading. </div><div>1.2 22.09.13 (Thomas)</div>
<div>- Fixed Ideal range</div><div>- Added parking timer</div><div>- Added detection of car is asleep.</div><div>1.1 21.09.13 (Thomas)</div><div> - Fixed ODO</div><div> - Fixed filter and mask for poll0 (thanks to Matt Beard)</div>
<div> - Verified estimated range</div><div> - Verified SOC</div><div> - Verified Charge state</div><div> - Added battery temperature reading (thanks to Matt Beard)</div><div>1.0 Initial release</div></div><div><br></div>
<div>Regards, Thomas</div><div><br></div></div><div><div><div><br><br><div>2013/9/21 Thomas Bergo <span dir="ltr"><<a>thomas.bergo@gmail.com</a>></span><br>
<blockquote style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div>Thanks to you all for participate.</div><div><br></div>Managed to spend some time on this project yesterday and this this evening.<div>
<br></div><div>Yesterday i was able to fix the ODO. And thanks to Matt i was able test the SOC, ideal range and Charge state. </div>
<div>Added the battery temperature reading form Matt's code.</div><div><br></div><div>My car is reporting range and ODO in Km, so added support to handle both miles and Km for ODO and Range based on can_mileskm.<br></div>
<div>
<div><br></div><div><i>"<span style="font-family:arial,sans-serif;font-size:13px">To receive all 0x3nn messages we could use filter SID 0x300 and mask 0x700, but I am worried that may cause a flood of messages.</span>"</i></div>
</div><div>The current code runs with this filter and mask, ans seems to be stable so far.</div><div><br></div><div>Still see some errors with the ideal range and the temperature reading. The app is reporting PEM: -125C, Motor: 144C and Battery: 5C </div>
<div><br></div><div>Pushed the code with updates from Matt to GitHub.</div><div><br></div><div>Regards, Thomas</div></div><div><br><br><div>2013/9/21 Michael Jochum <span dir="ltr"><<a>mikeljo@mac.com</a>></span><br>
<blockquote style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div><div><div style="word-wrap:break-word">Hi,<div><br></div><div>You can only set the Mask and Filter in a Configuraton Mode.</div>
<div><br></div><div>From Datasheet:</div><div>
<div title="Page 327">
<div>
<div><p><span style="font-size:10.000000pt;font-family:'Arial'">2</span></p></div></div></div></div></div></div></div></blockquote></div></div></blockquote></div></div></div></div></blockquote></div></div></div>
</div></blockquote></div></div></div></div></blockquote></div></div></blockquote></div>