<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
Nikolay,<br>
<br>
see around line 231 for the #pragma udata overlay
vehicle_overlay_data in the twizy module, and you're right, it's
purpose is to save RAM, every vehicle module shall use it.<br>
<br>
You normally only need to tell the CAN transceiver you're done
reading the buffer, that's done by clearing RXB0CONbits.RXFUL in the
poll() functions. A crash (overflow) of the transceiver is handled
by the framework.<br>
<br>
From your description my impression is you perhaps need to declare
the status variable you're using as "volatile"? Remember, the poll()
functions are interrupt code, and the compiler does some
optimization. Btw: it's easier to help if you upload your code to
github and include a link to it. Create some "temp" branch if you
don't like to push preliminary code into the master branch.<br>
<br>
There are currently no car_* variables for battery pack data, that's
why I introduced them as can_* variables for the twizy. The voltages
are stored in the battery_* structs, the power in can_power etc.,
maybe you can use a similar scheme.<br>
<br>
Regards,<br>
Michael<br>
<br>
<br>
<div class="moz-cite-prefix">Am 02.01.2013 15:41, schrieb Nikolay
Shishkov:<br>
</div>
<blockquote
cite="mid:1357137662.88577.YahooMailNeo@web142605.mail.bf1.yahoo.com"
type="cite">
<div style="color:#000; background-color:#fff; font-family:times
new roman, new york, times, serif;font-size:12pt">
<div style="font-family: 'times new roman', 'new york', times,
serif; font-size: 12pt;">Thanks for all the advice!</div>
<div style="font-family: 'times new roman', 'new york', times,
serif; font-size: 12pt;"><br>
</div>
<div style="font-family: 'times new roman', 'new york', times,
serif; font-size: 16px; color: rgb(0, 0, 0); background-color:
transparent; font-style: normal;">After I issued the MODULE
command, I was able to get results from my code.</div>
<div style="font-family: 'times new roman', 'new york', times,
serif; font-size: 16px; color: rgb(0, 0, 0); background-color:
transparent; font-style: normal;">So to the next problem.</div>
<div style="font-family: 'times new roman', 'new york', times,
serif; font-size: 16px; color: rgb(0, 0, 0); background-color:
transparent; font-style: normal;">I changed one of the CAN
filters to match a 0x30? message, and then in a switch run a
piece of code for message 0x301. This code should extract data
from the 8 bytes of the CAN message. </div>
<div style="font-family: 'times new roman', 'new york', times,
serif; font-size: 16px; color: rgb(0, 0, 0); background-color:
transparent; font-style: normal;">The thing is - the result
from the extraction was ok the first couple of times, and
since then no matter how I update the expression to fetch the
value I get exactly the same value as before... </div>
<div style="font-family: 'times new roman', 'new york', times,
serif; font-size: 16px; color: rgb(0, 0, 0); background-color:
transparent; font-style: normal;">So I wonder - have I crashed
the CAN bus transceiver? Do I need to supply a confirmation,
that I handle the message or is this handled by the framework?</div>
<div style="font-family: 'times new roman', 'new york', times,
serif; font-size: 16px; color: rgb(0, 0, 0); background-color:
transparent; font-style: normal;">Or is this something to do
with saving variables in a place where suddenly I can not
write anymore?</div>
<div style="font-family: 'times new roman', 'new york', times,
serif; font-size: 16px; color: rgb(0, 0, 0); background-color:
transparent; font-style: normal;"><br>
</div>
<div style="font-family: 'times new roman', 'new york', times,
serif; font-size: 16px; color: rgb(0, 0, 0); background-color:
transparent; font-style: normal;">Also - the volt/ampera and
the tesla files have </div>
<div style="background-color: transparent;">
<div style="background-color: transparent;">#pragma udata
overlay vehicle_overlay_data</div>
<div style="background-color: transparent;">As I understand to
reduce RAM usage, while<span style="font-size: 16px;
background-color: transparent;"> the twizy file does
not... I added it to my Think file, but am not sure -
could that have messed up the stuff?</span></div>
<div style="background-color: transparent; color: rgb(0, 0,
0); font-size: 16px; font-family: 'times new roman', 'new
york', times, serif; font-style: normal;"><span
style="font-size: 16px; background-color: transparent;"><br>
</span></div>
<div style="background-color: transparent; color: rgb(0, 0,
0); font-size: 16px; font-family: 'times new roman', 'new
york', times, serif; font-style: normal;">What is the
correct car_* variable to put the pack voltage and pack
current in?</div>
<div style="background-color: transparent; color: rgb(0, 0,
0); font-size: 16px; font-family: 'times new roman', 'new
york', times, serif; font-style: normal;"><br>
</div>
<div style="background-color: transparent; color: rgb(0, 0,
0); font-size: 16px; font-family: 'times new roman', 'new
york', times, serif; font-style: normal;">Thanks again,</div>
<div style="background-color: transparent; color: rgb(0, 0,
0); font-size: 16px; font-family: 'times new roman', 'new
york', times, serif; font-style: normal;">Nikolay</div>
<div style="background-color: transparent; color: rgb(0, 0,
0); font-size: 16px; font-family: 'times new roman', 'new
york', times, serif; font-style: normal;"><br>
</div>
</div>
<div style="font-family: 'times new roman', 'new york', times,
serif; font-size: 12pt;">
<div style="font-family: 'times new roman', 'new york', times,
serif; font-size: 12pt;">
<div dir="ltr"> <font face="Arial" size="2">
<hr size="1"> <b><span style="font-weight:bold;">From:</span></b>
Michael Balzer <a class="moz-txt-link-rfc2396E" href="mailto:dexter@expeedo.de"><dexter@expeedo.de></a><br>
<b><span style="font-weight: bold;">To:</span></b>
<a class="moz-txt-link-abbreviated" href="mailto:ovmsdev@lists.teslaclub.hk">ovmsdev@lists.teslaclub.hk</a> <br>
<b><span style="font-weight: bold;">Sent:</span></b>
Wednesday, January 2, 2013 11:43 AM<br>
<b><span style="font-weight: bold;">Subject:</span></b>
Re: [Ovmsdev] some partial success<br>
</font> </div>
<br>
<meta http-equiv="x-dns-prefetch-control" content="off">
<div id="yiv673931390">
<div>
<div class="yiv673931390moz-cite-prefix">Nikolay,<br>
<br>
the documentation needs some updates, the vehicle type
parameter is new.<br>
<br>
Easiest GPRS test is done by using the standard server
and the iOS or Android App.<br>
<br>
To set up your own OVMS server, you need a public IP,
a mysqld and perl. See "server" directory in the git
repository.<br>
<br>
Set up some mysql schema e.g. "ovms" and access, prime
the schema using "mysql ovms < ovms_server.sql" and
change "ovms_server.conf" accordingly.<br>
<br>
To be able to connect your module, manually add an
entry to the ovms_cars table like this:<br>
<br>
insert into ovms_cars set vehicleid='...',
carpass='...', userpass='...', changed=now();<br>
<br>
The server is started by "./ovms_server.pl" (or "perl
<a moz-do-not-send="true" target="_blank"
href="http://ovms_server.pl/">ovms_server.pl</a>" if
non-UNIX). Configure your module using "GPRS" and
"SERVER" and you should see log output from the server
(stdout).<br>
<br>
It's best to start without paranoid mode, so you can
read what's happening.<br>
<br>
Btw: I had trouble with my first SIM card as well in
the beginning. That was network/provider related,
after letting the module on for some hours, the GPRS
registration suddenly succeeded and has been quick +
stable since.<br>
<br>
Regards,<br>
Michael<br>
<br>
<br>
Am 02.01.2013 10:05, schrieb Nikolay Shishkov:<br>
</div>
<blockquote type="cite">
<div style="color: rgb(0, 0, 0); background-color:
rgb(255, 255, 255); font-family: 'times new roman',
'new york', times, serif; font-size: 12pt;">
<div>Thanks Mark, </div>
<div>Looking at the code the VEHICLE TYPE is the 4th
parameter of the MODULE command. </div>
<div>I will test this today and report back.</div>
<div><span style="background-color:transparent;">I
was looking at the user guide for Tesla and the
MODULE command has listed 3 parameters... </span><br>
</div>
<div style="color: rgb(0, 0, 0); font-size: 16px;
font-family: 'times new roman', 'new york', times,
serif; background-color: transparent; font-style:
normal;"><span
style="background-color:transparent;"><br>
</span></div>
<div>I forgot to mention that I tested 2 different
sim cards in Sweden:</div>
<div> 1- mini sim format (like iphone 4) with
adapter, operator 3 - did not work, the error code
is blinking too fast for me to reliably count it.</div>
<div> 2 - standard sim format, operator telia -
worked for sms</div>
<div><br>
</div>
<div style="color: rgb(0, 0, 0); font-size: 16px;
font-family: 'times new roman', 'new york', times,
serif; background-color: transparent; font-style:
normal;">Still haven't tested the gprs function.
Any good advice on how to test the GPRS function -
can I setup a simple server to just register the
incoming messages? </div>
<div style="color: rgb(0, 0, 0); font-size: 16px;
font-family: 'times new roman', 'new york', times,
serif; background-color: transparent; font-style:
normal;"><br>
</div>
<div style="color: rgb(0, 0, 0); font-size: 16px;
font-family: 'times new roman', 'new york', times,
serif; background-color: transparent; font-style:
normal;">Nikolay</div>
<div style="color: rgb(0, 0, 0); font-size: 16px;
font-family: 'times new roman', 'new york', times,
serif; background-color: transparent; font-style:
normal;"><br>
</div>
<div style="color: rgb(0, 0, 0); font-size: 16px;
font-family: 'times new roman', 'new york', times,
serif; background-color: transparent; font-style:
normal;"> </div>
<div style="font-family: 'times new roman', 'new
york', times, serif; font-size: 12pt;">
<div style="font-family: 'times new roman', 'new
york', times, serif; font-size: 12pt;">
<div dir="ltr"> <font face="Arial" size="2">
<hr size="1"> <b><span
style="font-weight:bold;">From:</span></b>
Mark Webb-Johnson <a moz-do-not-send="true"
rel="nofollow"
class="yiv673931390moz-txt-link-rfc2396E"
ymailto="mailto:mark@webb-johnson.net"
target="_blank"
href="mailto:mark@webb-johnson.net"><mark@webb-johnson.net></a><br>
<b><span style="font-weight:bold;">To:</span></b>
OVMS Developers <a moz-do-not-send="true"
rel="nofollow"
class="yiv673931390moz-txt-link-rfc2396E"
ymailto="mailto:ovmsdev@lists.teslaclub.hk" target="_blank"
href="mailto:ovmsdev@lists.teslaclub.hk"><ovmsdev@lists.teslaclub.hk></a>
<br>
<b><span style="font-weight:bold;">Sent:</span></b>
Wednesday, January 2, 2013 2:28 AM<br>
<b><span style="font-weight:bold;">Subject:</span></b>
Re: [Ovmsdev] some partial success<br>
</font> </div>
<br>
<div id="yiv673931390">
<div>Nikolay,
<div><br>
</div>
<div>
<blockquote type="cite">
<div>
<div style="color:rgb(0, 0, 0);
background-color:rgb(255, 255,
255);font-family:'times new roman',
'new york', times, serif;
font-size:12pt;">
<div style="font-family:'times new
roman', 'new york', times,
serif;font-size:16px;
color:rgb(0, 0,
0);background-color:transparent;font-style:normal;">Unfortunately
it did not seem to work. On STAT
request the response was generated
from the net_sms code and not my
new code for the Think EV.</div>
</div>
</div>
</blockquote>
</div>
<div><br>
</div>
<div>So long as you've registered the hook
correctly, it should work. Are you sure
you set the module correctly to TC so your
vehicle module is the one actually used?
This is the SMS MODULE command (I think it
is the last parameter).</div>
<div><br>
</div>
<div>You can SMS PARAMS? or MODULE? to see
what parameters are set.</div>
<div><br>
</div>
<div>
<blockquote type="cite">
<div>
<div style="color:rgb(0, 0, 0);
background-color:rgb(255, 255,
255);font-family:'times new roman',
'new york', times, serif;
font-size:12pt;">
<div style="font-family:'times new
roman', 'new york', times,
serif;font-size:16px;
color:rgb(0, 0,
0);background-color:transparent;font-style:normal;">Also
- what are the capabilities used
for?</div>
<div
style="background-color:transparent;">What
does "C6,C200-207" mean? I get the
200 to 207 are the extra commands
but how are they plugged to the
rest of the code?</div>
</div>
</div>
</blockquote>
</div>
<div><br>
</div>
<div>This is a new v2.x thing, used to tell
the App what the capabilities of the
vehicle module are. We don't use it at the
moment, but plan to use this in the app
code in order to customise the functions
and appearance on a per-vehicle-module
basis. For example, if the vehicle module
is able to support a lock/unlock command,
the capabilities will tell the Apps that,
and the apps can update the UI
appropriately.</div>
<div><br>
</div>
<div>
<blockquote type="cite">
<div>
<div style="color:rgb(0, 0, 0);
background-color:rgb(255, 255,
255);font-family:'times new roman',
'new york', times, serif;
font-size:12pt;">
<div style="background-color:
transparent; color: rgb(0, 0, 0);
font-size: 16px; font-family:
'times new roman', 'new york',
times, serif; font-style: normal;">f
I reprogram the board, do I need
to restart it somehow? Or is it
enough to just reprogram it from
the mplab x and the board will
restart?</div>
</div>
</div>
</blockquote>
</div>
<div><br>
</div>
<div>The board will restart automatically
after being programmed by MPLAB-X. If you
want to restart it, you can also SMS RESET
or just pull the power.</div>
<div><br>
</div>
<div>Regards, Mark.</div>
<div><br>
<div>
<div>On 2 Jan, 2013, at 9:22 AM, Nikolay
Shishkov wrote:</div>
<br
class="yiv673931390Apple-interchange-newline">
<blockquote type="cite">
<div>
<div style="color: rgb(0, 0, 0);
background-color: rgb(255, 255,
255); font-family: 'times new
roman', 'new york', times, serif;
font-size: 12pt;">
<div style="font-family: 'times
new roman', 'new york', times,
serif; font-size: 12pt;"><span>A
quick report.</span></div>
<div style="font-family: 'times
new roman', 'new york', times,
serif; font-size: 16px; color:
rgb(0, 0, 0); background-color:
transparent; font-style:
normal;"><span>I manged to flash
the firmware and register a
phone.</span></div>
<div style="font-family: 'times
new roman', 'new york', times,
serif; font-size: 16px; color:
rgb(0, 0, 0); background-color:
transparent; font-style:
normal;"><span>I also started on
a Think EV file based on the
Twizy one. I setup the CAN
filters and changed the code
to handle a state of charge
message. </span></div>
<div style="font-family: 'times
new roman', 'new york', times,
serif; font-size: 16px; color:
rgb(0, 0, 0); background-color:
transparent; font-style:
normal;">Unfortunately it did
not seem to work. On STAT
request the response was
generated from the net_sms code
and not my new code for the
Think EV.</div>
<div style="font-family: 'times
new roman', 'new york', times,
serif; font-size: 16px; color:
rgb(0, 0, 0); background-color:
transparent; font-style:
normal;"><br>
</div>
<div style="font-family: 'times
new roman', 'new york', times,
serif; font-size: 16px; color:
rgb(0, 0, 0); background-color:
transparent; font-style:
normal;">On checking the code
all seems fine - my stat
function was plugged correctly.</div>
<div style="font-family: 'times
new roman', 'new york', times,
serif; font-size: 16px; color:
rgb(0, 0, 0); background-color:
transparent; font-style:
normal;"><br>
</div>
<div style="font-family: 'times
new roman', 'new york', times,
serif; font-size: 16px; color:
rgb(0, 0, 0); background-color:
transparent; font-style:
normal;">I will continue
tomorrow, but wanted to ask if
anyone has good ideas to try?</div>
<div style="font-family: 'times
new roman', 'new york', times,
serif; font-size: 16px; color:
rgb(0, 0, 0); background-color:
transparent; font-style:
normal;"><br>
</div>
<div style="font-family: 'times
new roman', 'new york', times,
serif; font-size: 16px; color:
rgb(0, 0, 0); background-color:
transparent; font-style:
normal;">Also - what are the
capabilities used for?</div>
<div
style="background-color:transparent;">What
does "C6,C200-207" mean? I get
the 200 to 207 are the extra
commands but how are they
plugged to the rest of the code?<br>
</div>
<div style="background-color:
transparent; color: rgb(0, 0,
0); font-size: 16px;
font-family: 'times new roman',
'new york', times, serif;
font-style: normal;"><br>
</div>
<div style="background-color:
transparent; color: rgb(0, 0,
0); font-size: 16px;
font-family: 'times new roman',
'new york', times, serif;
font-style: normal;">If I
reprogram the board, do I need
to restart it somehow? Or is it
enough to just reprogram it from
the mplab x and the board will
restart?</div>
<div style="background-color:
transparent; color: rgb(0, 0,
0); font-size: 16px;
font-family: 'times new roman',
'new york', times, serif;
font-style: normal;"><br>
</div>
<div style="background-color:
transparent; color: rgb(0, 0,
0); font-size: 16px;
font-family: 'times new roman',
'new york', times, serif;
font-style: normal;">Any help is
appreciated,</div>
<div style="background-color:
transparent; color: rgb(0, 0,
0); font-size: 16px;
font-family: 'times new roman',
'new york', times, serif;
font-style: normal;">Nikolay</div>
<div style="font-family: 'times
new roman', 'new york', times,
serif; font-size: 16px; color:
rgb(0, 0, 0); background-color:
transparent; font-style:
normal;"><br>
</div>
<div style="font-family: 'times
new roman', 'new york', times,
serif; font-size: 12pt;"><br>
</div>
<div style="font-family: 'times
new roman', 'new york', times,
serif; font-size: 12pt;">
<div style="font-family: 'times
new roman', 'new york', times,
serif; font-size: 12pt;">
<div dir="ltr"> <font
face="Arial" size="2">
<hr size="1"> <b><span
style="font-weight:bold;">From:</span></b>
Michael Balzer <<a
moz-do-not-send="true"
rel="nofollow"
ymailto="mailto:dexter@expeedo.de"
target="_blank"
href="mailto:dexter@expeedo.de">dexter@expeedo.de</a>><br>
<b><span
style="font-weight:bold;">To:</span></b>
<a moz-do-not-send="true"
rel="nofollow"
ymailto="mailto:ovmsdev@lists.teslaclub.hk"
target="_blank"
href="mailto:ovmsdev@lists.teslaclub.hk">ovmsdev@lists.teslaclub.hk</a>
<br>
<b><span
style="font-weight:bold;">Sent:</span></b>
Tuesday, January 1, 2013
9:37 PM<br>
<b><span
style="font-weight:bold;">Subject:</span></b>
Re: [Ovmsdev] sprintf /
crashes<br>
</font> </div>
<br>
<div id="yiv673931390">
<div> Mark,<br>
<br>
transparent chunk
splitting seems to be
non-trivial, so I split my
data transfers.
Everything's working fine
again, so I'll merge into
the master next if you
don't object.<br>
<br>
Btw, AT+CIPSEND? gave me
1460 bytes, so that's
supposed to be the size
limit we should keep in
mind until we find a
better solution.<br>
<br>
@Nikolay: please note,
that's the total size that
can be sent within one
net_msg_start() ...
net_msg_send(), the buffer
size (net_scratchpad)
further limits a single
MSG line to currently 199
bytes max.<br>
<br>
Regards,<br>
Michael<br>
<br>
<br>
<div
class="yiv673931390moz-cite-prefix">Am
31.12.2012 16:23,
schrieb Michael Balzer:<br>
</div>
<blockquote type="cite">Mark,
<br>
<br>
I think I found my link
dropping problem:
scanning a diag log I
took, I found out
CIPSEND will fail with a
plain "ERROR" if the
data size exceeds about
1500 bytes. I guess
that's either the SIM908
buffer size or the max
network packet size. I
thought the SIM908 would
handle dividing data
into packets as needed.
The SIM908 manual
mentions the max packet
size depends on network
status and should be
queried by
"AT+CIPSEND?". After the
overrun
net_state_activity()
will not recognize
"ERROR" to terminate the
pending msg, so will run
into the timeout and
start a network re-init.
<br>
<br>
My battery status data
exceeds 1500 bytes on
first run and later on
if enough cells need
updates. I'll think
about how to split up
data packets into
multiple CIPSENDs. Would
be nice if the net
functions take care of
this transparently. <br>
<br>
A secondary issue turned
up from the diag log:
the SIM908 crashed in
the middle of a CIPSEND
command while the module
continued to run
normally. The module
still thought it's in
NET_STATE_READY, so did
not re-initalize the
modem. The connection
could then be
established on the next
CIPSTART, but the
complete INIT stuff had
not been done. So it
seems independant SIM908
resets need to be
handled as well, and
they can occur anytime.
I'll see if I can solve
that too. <br>
<br>
Regards, <br>
Michael <br>
<br>
<br>
Am 30.12.2012 15:42,
schrieb Michael Balzer:
<br>
<blockquote type="cite">I
hesitate to merge into
the master because I
currently have link /
connectivity problems,
especially during
driving. I introduced
a GPS logging to
optimize my antenna
positions and managed
to get some really
nice tracks three days
ago, so I don't think
this is related to my
changes... but I'm not
100% sure. I tried
different antenna
positions and another
GSM network, but the
connection keeps
dropping when moving
the car, and GPS
position updates need
minutes. Could be
weather conditions
...or some tricky race
condition bug? <br>
</blockquote>
<br>
<br>
<br>
<fieldset
class="yiv673931390mimeAttachmentHeader"></fieldset>
<br>
<pre>_______________________________________________
OvmsDev mailing list
<a moz-do-not-send="true" rel="nofollow" class="yiv673931390moz-txt-link-abbreviated" ymailto="mailto:OvmsDev@lists.teslaclub.hk" target="_blank" href="mailto:OvmsDev@lists.teslaclub.hk">OvmsDev@lists.teslaclub.hk</a>
<a moz-do-not-send="true" rel="nofollow" target="_blank" href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br>
<pre class="yiv673931390moz-signature">--
Michael Balzer * Paradestr. 8 * D-42107 Wuppertal
Fon 0202 / 272 2201 * Handy 0176 / 206 989 26
</pre>
</div>
</div>
<br>
_______________________________________________<br>
OvmsDev mailing list<br>
<a moz-do-not-send="true"
rel="nofollow"
ymailto="mailto:OvmsDev@lists.teslaclub.hk"
target="_blank"
href="mailto:OvmsDev@lists.teslaclub.hk">OvmsDev@lists.teslaclub.hk</a><br>
<a moz-do-not-send="true"
rel="nofollow"
target="_blank"
href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a><br>
<br>
<br>
</div>
</div>
</div>
</div>
_______________________________________________<br>
OvmsDev mailing list<br>
<a moz-do-not-send="true"
rel="nofollow"
ymailto="mailto:OvmsDev@lists.teslaclub.hk"
target="_blank"
href="mailto:OvmsDev@lists.teslaclub.hk">OvmsDev@lists.teslaclub.hk</a><br>
<a moz-do-not-send="true"
rel="nofollow"
class="yiv673931390moz-txt-link-freetext"
target="_blank"
href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a><br>
</blockquote>
</div>
<br>
</div>
</div>
</div>
<br>
_______________________________________________<br>
OvmsDev mailing list<br>
<a moz-do-not-send="true" rel="nofollow"
ymailto="mailto:OvmsDev@lists.teslaclub.hk"
target="_blank"
href="mailto:OvmsDev@lists.teslaclub.hk">OvmsDev@lists.teslaclub.hk</a><br>
<a moz-do-not-send="true" rel="nofollow"
target="_blank"
href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a><br>
<br>
<br>
</div>
</div>
</div>
<br>
<fieldset class="yiv673931390mimeAttachmentHeader"></fieldset>
<br>
<pre>_______________________________________________
OvmsDev mailing list
<a moz-do-not-send="true" rel="nofollow" class="yiv673931390moz-txt-link-abbreviated" ymailto="mailto:OvmsDev@lists.teslaclub.hk" target="_blank" href="mailto:OvmsDev@lists.teslaclub.hk">OvmsDev@lists.teslaclub.hk</a>
<a moz-do-not-send="true" rel="nofollow" class="yiv673931390moz-txt-link-freetext" target="_blank" href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br>
<br>
<pre class="yiv673931390moz-signature">--
Michael Balzer * Paradestr. 8 * D-42107 Wuppertal
Fon 0202 / 272 2201 * Handy 0176 / 206 989 26
</pre>
</div>
</div>
<meta http-equiv="x-dns-prefetch-control" content="on">
<br>
_______________________________________________<br>
OvmsDev mailing list<br>
<a moz-do-not-send="true"
ymailto="mailto:OvmsDev@lists.teslaclub.hk"
href="mailto:OvmsDev@lists.teslaclub.hk">OvmsDev@lists.teslaclub.hk</a><br>
<a moz-do-not-send="true"
href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev"
target="_blank">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a><br>
<br>
<br>
</div>
</div>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
OvmsDev mailing list
<a class="moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.teslaclub.hk">OvmsDev@lists.teslaclub.hk</a>
<a class="moz-txt-link-freetext" href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br>
<pre class="moz-signature" cols="72">--
Michael Balzer * Paradestr. 8 * D-42107 Wuppertal
Fon 0202 / 272 2201 * Handy 0176 / 206 989 26
</pre>
</body>
</html>