<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
I can confirm that switching between charge modes does not work 100%.<br>
I tried switching to range mode, and then start charging from the
app.<br>
<br>
The battery indicator in the car changes, i.e. the top of the
battery is visible.<br>
Range does not change, also charge mode visible on the VDS does not
change (still standard charging)<br>
<br>
On the (Android) app , it's shows the same. After i stopped the
charging, i received a SMS that does not start with Range - or
Standard - <br>
just "Charging Stopped, ideal range ..etc"<br>
<br>
Tonight i'll try to send the commands manually on the CAN bus, to
see if i see any difference in behaviour.<br>
<br>
<br>
Btw, i do receive a "Hello World" push message on my android phone,
but not on the Ipad.<br>
I'm not using any testflight version anymore, but the one from the
appstore.<br>
<br>
Btw2, when a charge is stopped, i used to receive a push message +
SMS, this somehow does not work anymore for me. I only receive the
SMS<br>
<br>
Btw3, the car powers up fine, and starts charging, even if left
unused (but connected) for over a day.<br>
<br>
-Michael<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
Op 17-2-2012 8:06, Mark Webb-Johnson schreef:
<blockquote
cite="mid:BFC8FE66-E9AA-4F2C-BB6A-861E65DA1EA6@webb-johnson.net"
type="cite">
<div><br>
</div>
<div>
<blockquote type="cite">
<div>P.S. Could someone fix the display so it reads Range Mode
instead of Standard Mode when switched from standard to
range? (Much appreciated.)</div>
</blockquote>
</div>
<div>
<div><br>
</div>
</div>
<div>Is this Android App?</div>
<div><br>
</div>
<div>If so, Sonny (again): modes are 0=standard,
1=storage,3=range,4=performance</div>
<div><br>
</div>
<div>P.S. What happened to mode 2? Did there used to be a mystery
fifth mode?</div>
<br>
<div>
<div>On 17 Feb 2012, at 2:59 PM, William Petefish wrote:</div>
<br class="Apple-interchange-newline">
<blockquote type="cite">
<div>Mark,</div>
<div><br>
</div>
Yes, fully repeatable, reproducible, and verifiable.
<div><br>
</div>
<div>When not woken up first, none of the commands work.</div>
<div><br>
</div>
<div>I will restart the module and try further.</div>
<div><br>
</div>
<div>It will disarm the alarm and allow it to be driven. </div>
<div><br>
</div>
<div>William</div>
<div><br>
</div>
<div>P.S. Could someone fix the display so it reads Range Mode
instead of Standard Mode when switched from standard to
range? (Much appreciated.)</div>
<div><br>
<div><br>
<div class="gmail_quote">On Fri, Feb 17, 2012 at 12:51 AM,
Mark Webb-Johnson <span dir="ltr"><<a
moz-do-not-send="true"
href="mailto:mark@webb-johnson.net">mark@webb-johnson.net</a>></span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div style="word-wrap:break-word">William,
<div><br>
</div>
<div>Is it repeatable?</div>
<div><br>
</div>
<div>ie; plug in, stop charge. wait 5 minutes until
coolant pump turns off, then try start charge from
the app.</div>
<div>
<br>
</div>
<div>Also, are other commands working (like
lock/unlock)?</div>
<div><br>
</div>
<div>After setting the feature for write-enabled CAN
bus, you need to restart the module. If not, none
of the commands will work. If at least one of the
commands is working, then that is fine.</div>
<div><br>
</div>
<div>Regards, Mark.</div>
<div><br>
</div>
<div>P.S. Not wishing to hijack this thread, but
since you are in the USA - could you test the
lock/unlock commands for us on your US car?
Supposedly, the US cars don't have an immobiliser
so that the UNLOCK command will disable the alarm
and allow the car to be driven. Please try and let
us know.</div>
<div>
<div class="h5">
<div><br>
</div>
<div>
<div>
<div>On 17 Feb 2012, at 2:35 PM, William
Petefish wrote:</div>
<br>
<blockquote type="cite">
<div>Mark,</div>
<div><br>
</div>
Yes, I did and to no avail. I had
purposefully let the car sit until it went
into power save mode and tried again, no
joy.
<div>
<br>
</div>
<div>Might it have something to do with
the new FW on the roadster? (4.6.4 I
think is the FW that is on mine.) My
roadster is a 2.5.</div>
<div>
<div><br>
</div>
<div>William<br>
<div><br>
<div class="gmail_quote">On Fri, Feb
17, 2012 at 12:29 AM, Mark
Webb-Johnson <span dir="ltr"><<a
moz-do-not-send="true"
href="mailto:mark@webb-johnson.net"
target="_blank">mark@webb-johnson.net</a>></span>
wrote:<br>
<blockquote class="gmail_quote"
style="margin:0 0 0
.8ex;border-left:1px #ccc
solid;padding-left:1ex">
<div
style="word-wrap:break-word">William:
<div><br>
</div>
<div>Current (1.2.0-rc3) code
is:</div>
<div><br>
</div>
<blockquote style="margin:0 0
0
40px;border:none;padding:0px">
<div>
<div>void
can_tx_setchargecurrent(unsigned
char current)</div>
<div> {</div>
<div> while
(TXB0CONbits.TXREQ) {}
// Loop until TX is done</div>
<div> TXB0CON = 0;</div>
<div> TXB0SIDL =
0b01000000; // Setup
0x102</div>
<div> TXB0SIDH =
0b00100000; // Setup
0x102</div>
<div> TXB0D0 = 0x05;</div>
<div> TXB0D1 = 0x02;</div>
<div> TXB0D2 = 0x00;</div>
<div> TXB0D3 = 0x00;</div>
<div> TXB0D4 = current;</div>
<div> TXB0D5 = 0x00;</div>
<div>
TXB0D6 = 0x00;</div>
<div> TXB0D7 = 0x00;</div>
<div> TXB0DLC =
0b00001000; // data
length (8)</div>
<div> TXB0CON =
0b00001000; // mark for
transmission</div>
<div> while
(TXB0CONbits.TXREQ) {}
// Loop until TX is done</div>
<div><br>
</div>
<div>
can_tx_wakeup(); //
Also, wakeup the car if
necessary</div>
<div> }</div>
</div>
<div><br>
</div>
<div>
<div>void
can_tx_wakeup(void)</div>
<div> {</div>
<div> while
(TXB0CONbits.TXREQ) {}
// Loop until TX is done</div>
<div>
TXB0CON = 0;</div>
<div> TXB0SIDL =
0b01000000; // Setup
0x102</div>
<div> TXB0SIDH =
0b00100000; // Setup
0x102</div>
<div> TXB0D0 = 0x0a;</div>
<div> TXB0DLC =
0b00000001; // data
length (8)</div>
<div> TXB0CON =
0b00001000; // mark for
transmission</div>
<div> while
(TXB0CONbits.TXREQ) {}
// Loop until TX is done</div>
<div> }</div>
</div>
</blockquote>
<div><br>
</div>
<div>That should work.
Pre-rc3, I used to see this,
but since rc3 it has been ok
for me.</div>
<div><br>
</div>
<div>Maybe the bus was busy
and lost the wakeup message?
Did you try sending any
other commands, or repeating
the start charge command?</div>
<div><br>
</div>
<div>What is the version of
your car (2.x or 1.5?).</div>
<div><br>
</div>
<div>Regards, Mark.</div>
<div><br>
</div>
<div>P.S. There is also a
specific command C,18 that
calls the CAN wakeup
function. Not sure if the
Android App supports it or
not.</div>
<div>
<div>
<div><br>
</div>
<div>
<div>
<div>On 17 Feb 2012,
at 2:22 PM, William
Petefish wrote:</div>
<br>
<blockquote
type="cite">Mark,<br>
<div><br>
</div>
<div>Feature Needed:
Wake Up command.</div>
<div><br>
</div>
<div>I tried to send
the start charge
command from my
android phone and
it wouldn't start
to charge or
change charging
mode, etc. without
being woken up by
opening/closing
the
doors/trunk/remote/etc. </div>
<div><br>
</div>
<div>I am using the
latest release
(1.20) and the
Android app.</div>
<div><br>
</div>
<div>William</div>
</blockquote>
</div>
<br>
</div>
</div>
</div>
</div>
<br>
_______________________________________________<br>
OvmsDev mailing list<br>
<a moz-do-not-send="true"
href="mailto:OvmsDev@lists.teslaclub.hk"
target="_blank">OvmsDev@lists.teslaclub.hk</a><br>
<a moz-do-not-send="true"
href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev"
target="_blank">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a><br>
<br>
</blockquote>
</div>
<br>
</div>
</div>
</div>
</blockquote>
</div>
<br>
</div>
</div>
</div>
</div>
<br>
_______________________________________________<br>
OvmsDev mailing list<br>
<a moz-do-not-send="true"
href="mailto:OvmsDev@lists.teslaclub.hk">OvmsDev@lists.teslaclub.hk</a><br>
<a moz-do-not-send="true"
href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev"
target="_blank">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a><br>
<br>
</blockquote>
</div>
<br>
</div>
</div>
_______________________________________________<br>
OvmsDev mailing list<br>
<a moz-do-not-send="true"
href="mailto:OvmsDev@lists.teslaclub.hk">OvmsDev@lists.teslaclub.hk</a><br>
<a moz-do-not-send="true"
href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a><br>
</blockquote>
</div>
<br>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
OvmsDev mailing list
<a class="moz-txt-link-abbreviated" href="mailto:OvmsDev@lists.teslaclub.hk">OvmsDev@lists.teslaclub.hk</a>
<a class="moz-txt-link-freetext" href="http://lists.teslaclub.hk/mailman/listinfo/ovmsdev">http://lists.teslaclub.hk/mailman/listinfo/ovmsdev</a>
</pre>
</blockquote>
<br>
<br>
<pre class="moz-signature" cols="72">--
Stegen Electronics
Kwartslaan 95
3162 RD Rhoon
The Netherlands
Tel: +31 10-5016960
<a class="moz-txt-link-abbreviated" href="http://www.stegen.com">www.stegen.com</a></pre>
</body>
</html>