[Ovmsdev] OBD/UDS Poller receiver rework

Chris van der Meijden chris at arachnon.de
Sun Sep 6 15:39:35 HKT 2020

I see some strange behaviour on the T26A e-Up with the new code. I
don't get all values from the bus after a fresh reboot (mostly no VIN,
sometimes also no SOC)). I have to sent a wakeup call first:
I (160137) ovms-server-v2: Send MP-0
1,0,0,0,0,0,0,0,0.00,0.00,0I (160137) ovms-server-v2: Send MP-0
D0,0,5,0,0,0,0,0,0,159,0,0,0,0,11.83,0,12.6,0,0,0,0I (160147) ovms-
server-v2: Send MP-0 F3.2.015-42-g2ab8d062/ota_0/main (build idf
v3.3.2-881-g22d636b7b Sep  6 2020 09:04:40),,18,1,VWUP.T26,CWLANI
(169127) webserver: HTTP POST /api/executeI (169147) webcommand:
HttpCommandStream[0x3f852fcc]: 3964692 bytes free, executing: wakeupI
(171147) v-vweup-t26: Sent Wakeup Command - stage 1I (171267) v-vweup-
t26: Sent Wakeup Command - stage 2OVMS# wakeupVehicle has been wokenI
(193527) v-vweup-t26: Comfort CAN calls for sleepI (221137) ovms-
server-v2: Send MP-0
,-1,0,0,0,0,0,0,0,0.00,0.00,0I (221147) ovms-server-v2: Send MP-0
D0,0,5,16,0,0,0,36030,0,220,25,0,1,1,11.47,0,12.6,0,0,0,0I (221147)
ovms-server-v2: Send MP-0 F3.2.015-42-g2ab8d062/ota_0/main (build idf
v3.3.2-881-g22d636b7b Sep  6 2020
I did not change my code and have never seen this before. Perhaps a
problem with the new polling code?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openvehicles.com/pipermail/ovmsdev/attachments/20200906/32cd79ea/attachment.htm>

More information about the OvmsDev mailing list