[Ovmsdev] 3.2.012 MAIN OTA
mark at webb-johnson.net
Thu Apr 30 10:01:12 HKT 2020
Since I deployed this on my car, I haven’t had a single modem lockup. In every case it has recovered nicely from loss of signal. Looks to me like flushing the uart buffer really has an impact.
I’ve got a couple of open support cases with similar issues. Let’s hope this resolves those.
> On 30 Apr 2020, at 2:32 AM, Michael Balzer <dexter at expeedo.de> wrote:
> Same on dexters-web.
> Am 29.04.20 um 06:18 schrieb Mark Webb-Johnson:
>> 3.2.012 is working well for me, and no reports or issues from EAP users, so I have released it to MAIN today (on api.openvehicles.com).
>> Regards, Mark.
>> Begin forwarded message:
>>> From: Mark Webb-Johnson <mark at webb-johnson.net>
>>> Date: 22 April 2020 at 9:45:14 AM HKT
>>> To: OVMS Developers <ovmsdev at lists.openvehicles.com>
>>> Subject: [Ovmsdev] 3.2.012 EAP OTA
>>> Reply-To: OVMS Developers <ovmsdev at lists.openvehicles.com>
>>> I think the tpms bug is serious enough to require a release. So, I’ve built a 3.2.012 and released to EAP at api.openvehicles.com.
>>> 2020-04-22 MWJ 3.2.012 OTA release
>>> - #357 tpms rear left temperature incorrect in v2 protocol
>>> - #354 Flush UART buffer when power cycling modem
>>> - General stability improvements to CAN logging and playback
>>> As usual, for full changelog see:
>>> This will also allow us to get more feedback on the uart reset approach, and if it makes any difference to those modules that can’t seem to recover from loss of cellular connection.
>>> Regards, Mark.
>>> OvmsDev mailing list
>>> OvmsDev at lists.openvehicles.com
>> OvmsDev mailing list
>> OvmsDev at lists.openvehicles.com
> Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
> Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
> OvmsDev mailing list
> OvmsDev at lists.openvehicles.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the OvmsDev