[Ovmsdev] DA26 breakout

[Michael Balzer]

Mark,

do you know of some kind of prototyping board available that fits to our piggy back expansion layout?

Something like this: https://www.robotshop.com/de/de/cytron-arduino-proto-schild.html

Regards,
Michael


Am 03.04.19 um 06:48 schrieb Mark Webb-Johnson:
>
> If you have work to do on this DA26 expansion ports, this is pretty cool and well built:
>
>     https://www.aliexpress.com/item/26-Pin-D-SUB-DB26-3-Rows-Serial-Parallel-Port-Serial-Shellless-Male-And-Female-Connector/32886738786.html?spm=a2g0s.9042311.0.0.20924c4dg34EEU
>
>
>
>
>
>
> _______________________________________________
> OvmsDev mailing list
> OvmsDev at lists.openvehicles.com
> http://lists.openvehicles.com/mailman/listinfo/ovmsdev

-- 
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openvehicles.com/pipermail/ovmsdev/attachments/20190407/f87a8ce2/attachment.html>