[Ovmsdev] Locations and scripts

[ovms]

Just to clarify, I ment CAN2, not CAN1. Any hint on how to fake the "car on" metric or bypass this check is appreciated.

Kind regards,
Stein Arne Sordal




On 2019-03-31 15:47, Mark Webb-Johnson <mark at webb-johnson.net> wrote:
> Except it does use the metric that says the car is on (for the car theft feature). > On 31 Mar 2019, at 9:37 PM, Mark Webb-Johnson <mark at webb-johnson.net> wrote: > > Location service just works off gps data. For cars using the gps in the simcom modules, that shouldn’t rely on can at all. > > Regards, Mark > >> On 29 Mar 2019, at 3:56 PM, ovms <ovms at topphemmelig.no> wrote: >> >> >> Hi >> >> I would like to run scripts based on location. The scripts work fine, but the location service stops working. >> I guess the location service requires CAN1 to be working? >> Since CAN1 stops receiving after a short period of time, the location service also stops. >> Is there a way to bypass this so the location service does not depend on CAN1 working? >> >> Kind regards, >> Stein Arne Sordal >> >> _______________________________________________ >> OvmsDev mailing list >> OvmsDev at lists.openvehicles.com >> http://lists.openvehicles.com/mailman/listinfo/ovmsdev _______________________________________________ OvmsDev mailing list OvmsDev at lists.openvehicles.com http://lists.openvehicles.com/mailman/listinfo/ovmsdev   


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openvehicles.com/pipermail/ovmsdev/attachments/20190331/9aa52dc7/attachment.html>