[Ovmsdev] 12V calibration default factor

Geir Øyvind Vælidalo geir at validalo.net
Tue May 1 19:14:49 HKT 2018


For me ,191 gave the best result.

Geir

> 30. apr. 2018 kl. 23:10 skrev Michael Balzer <dexter at expeedo.de>:
> 
> Our default factor of 182 for the 12V ADC converter seems to be too low on current 3.1 production modules.
> 
> Calibration results from three modules:
> 192.35
> 199.15 (that's mine)
> 200.2
> So the default was way off on these. If these values are typical, our default should be around 197.
> 
> Can some please check their modules and provide some more factors to verify this?
> 
> Regards,
> Michael
> 
> -- 
> Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
> Fon 02333 / 833 5735 * Handy 0176 / 206 989 26
> _______________________________________________
> OvmsDev mailing list
> OvmsDev at lists.openvehicles.com
> http://lists.openvehicles.com/mailman/listinfo/ovmsdev

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openvehicles.com/pipermail/ovmsdev/attachments/20180501/37215bc8/attachment.htm>


More information about the OvmsDev mailing list