[Ovmsdev] First connection to car

[Mark Webb-Johnson]

I have my phone’s wifi hotspot on the module as well. So, even on the road I can just turn that on, the module connects to my phone, then I can get back into it directly.

I think AP is fine now - just trying to minimise the number of things I am using so as to get a very stable base. Then can enable other things and if it breaks I know where to check.

Regards, Mark.

> On 24 Mar 2018, at 5:20 PM, Julien “JaXX” Banchet <jaxx at jaxx.org> wrote:
> 
> 
> On 24 Mar 2018 at 10:12 +0100, Mark Webb-Johnson <mark at webb-johnson.net>, wrote:
>> 
>> I’m loving my new arrangement (without AP). I have modem and scanning WIFI client running. When I get home, the car connects to home wifi so I can ssh in, scp logs off, OTA new firmware. As I drive away, it loses WIFI and seamlessly switches to modem.
>> 
>> There is something very cool about doing this on a little embedded device:
>> 
>> $ ssh mark at ev914.local <mailto:mark at ev914.local>
>> 
>> Welcome to the Open Vehicle Monitoring System (OVMS) - SSH Console
>> Firmware: 3.1.000-10-gd1f4408/factory/main
>> Hardware: OVMS WIFI BLE BT cores=2 rev=ESP32/1 
> 
> 
> Gotta admit, it is sexy !
> 
> Too bad I don’t get wifi underground and AP mode locks up server connection, won’t prevent me playing with Kivy on a Raspi until that settles down to show stuff while driving (which is why I’m a big fan of the apclient mode)
> 
> JB./.
> _______________________________________________
> OvmsDev mailing list
> OvmsDev at lists.teslaclub.hk
> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openvehicles.com/pipermail/ovmsdev/attachments/20180324/8a7c3617/attachment.htm>