[Ovmsdev] 3.1 Production

Igor Medvedev medfedeff at gmail.com
Fri Mar 2 00:34:52 HKT 2018


Mark,

I want to buy OVMS 3.1 board and contribute to the project, as I've wrote
before I had experience in 3g modules at commands and in CAN interfaces. If
you have non ordered boards, then put me in order list, please.

Thanks

On Wed, Feb 28, 2018 at 8:28 AM, Mark Webb-Johnson <mark at webb-johnson.net>
wrote:

>
> It is with great relief that I can announce I just wrote a very big cheque
> to produce the first batch of 120 OVMS v3.1 modules. That is on top of the
> last big cheque I wrote a couple of months ago for the injection moulding.
>
> The order is in, and production has started.
>
> Specifically, I’ve ordered:
>
>
>    - 120x OVMS v3.1 modules (cased in black injection moulded enclosures)
>    - 60x OVMS 3G modems with EU frequencies
>    - 60x OVMS 3G modems with US frequencies
>
>
> These include WROVER modules with dual processor cores, 16MB flash and 4MB
> SPI RAM. Also all the other OVMS v3 features such as Wifi, Bluetooth, 3x
> CAN buses, SD CARD, GPIOs, external 12V power control, pluggable modem
> modules, OTA firmware updates, etc.
>
> 100 (50x EU, 50x US) of these will go direct to FastTech for end users. 20
> will come to me in Hong Kong for developers and special users. We have
> enough stock of the other cables, antennas, etc, already at FastTech.
>
> I’ll announce pricing in the next few days. There will be special pricing
> for everybody here (developers) as well as existing users who want to
> upgrade. This first batch are early production units, with beta firmware,
> intended for expert users only.
>
> To all those that have contributed to the project so far, we owe a huge
> debt of thanks. We’ve still got a long way to go with the firmware, but It
> feels good to finally get this out the door. I’m confident that we have a
> fantastic base on which to build great things in the coming years.
>
> Regards, Mark.
>
>
> _______________________________________________
> OvmsDev mailing list
> OvmsDev at lists.teslaclub.hk
> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
>
>


-- 
Thanks
medfedeff at gmail.com
+3-8-050-032-03-05
skype:igor.medvedeff
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openvehicles.com/pipermail/ovmsdev/attachments/20180301/cd3ba3e8/attachment.htm>


More information about the OvmsDev mailing list