[Ovmsdev] OVMS v3.1 Production Batch #2
mark at webb-johnson.net
Tue Jun 5 10:55:33 HKT 2018
All up on FastTech and ready to go. Coupon code (US$20) for existing OVMS users upgrading v2 to v3 can be applied to either the US or EU kits, and is:
This coupon code is valid until the end of June 2018, after which time there will be no more upgrade discount. Need to move on to CE and FCC certification now.
@Michael: Can you publicise this to your users?
> On 4 Jun 2018, at 6:57 PM, Mark Webb-Johnson <mark at webb-johnson.net> wrote:
> Here is the new packaging, for batch #2 onwards.
> Fasttech has them up on the site now, and ordering is open. New coupon code coming in a few hours.
> Regards, Mark
> On 4 Jun 2018, at 10:36 AM, Mark Webb-Johnson <mark at webb-johnson.net <mailto:mark at webb-johnson.net>> wrote:
>> Production batch #2 is done, and should be up on fasttech within the next day or so.
>> A] 50x US kits (module + US modem)
>> B] 145x EU kits (module + EU modem)
>> C] 20x modules only (board + case, but no modem so wifi/bluetooth only)
>> D] 5x extra optional EU modems
>> E] 5x extra optional US modems
>> All factory loaded with 3.1.006 firmware. Items [C], [D], and [E] will end up as new SKUs.
>> These modules include the cp2102 to address the 12v power sd card issue, and now come in a nice padded foam cardboard box. Other than that, identical to batch #1.
>> I’m arranging a one-off coupon code for the US$20 discount for existing OVMS v2 owners to upgrade, valid until the end of this month (June 2018). I’ll let you all know what that is, as soon as I get it. Beyond then, everyone pays full price. There are 200+ modules in this batch, so hopefully enough. If we run out too quickly, I’ll re-think this, but the project needs money to get the FCC+CE certifications, and that needs to come from somewhere.
>> Regards, Mark.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the OvmsDev