[Ovmsdev] Can buses stop after some time

[Stein Arne Sordal]

Did anyone figure out what happens here?
Now the OVMS thinks my car is stolen since it´s moving (GPS) and CAN2 is dead.
Reboot of module brings CAN2 back to life for a period of time.

-Stein Arne Sordal-



> On 11 May 2018, at 12:29, Stein Arne Sordal <ovms at topphemmelig.no> wrote:
> 
> Hi Tom
> 
> I have seen this with my Leaf.
> I´ve been on vacation, so I haven´t got time to test a lot, but it looks like one of the can buses stops. Started testing again today.
> 
> -Stein Arne Sordal-
> 
> 
> 
>> On 11 May 2018, at 12:22, Tom Parker <tom at carrott.org> wrote:
>> 
>> Hi all,
>> 
>> I synced up with master about a week ago and since then I've seen both can busses stop working. I still see the 12v battery metric changing, but everything that comes from the car stops. Rebooting the module with "module reset" does not seem to fix it, while make app-flash monitor does fix it. I haven't tried make monitor on it's own.
>> 
>> Is anyone else seeing behavior like this?
>> 
>> Sorry for the vague bug report. I'll spend some time later this weekend to try to gather more information.
>> _______________________________________________
>> OvmsDev mailing list
>> OvmsDev at lists.openvehicles.com
>> http://lists.openvehicles.com/mailman/listinfo/ovmsdev
> 
> _______________________________________________
> OvmsDev mailing list
> OvmsDev at lists.openvehicles.com
> http://lists.openvehicles.com/mailman/listinfo/ovmsdev