[Ovmsdev] OVMS v3 Hardware

[Michael Balzer]

Great news!

Maybe Fasttech should list the product already so people can pre-order?

Regards,
Michael


Am 11.09.2017 um 07:11 schrieb Mark Webb-Johnson:
>
> No major problems found on the RC1 hardware, and the SIMCOM SIM5360
> modem is now working well. Just a few minor layout improvements.
>
> So I just gave the go-ahead for the first small pre-production run of
> OVMS v3 hardware. 10 sets for developers. I should have them in a week
> or so. As I said before:
>
>     If you are interested in helping out with development / porting
>     vehicle support, and want one of these early boards, please could
>     you eMail me personally to mark at webb-johnson.net
>     <mailto:mark at webb-johnson.net> with the following details:
>
>       * Contact eMail address
>       * Full name
>       * Postal address
>       * Postal contact telephone number
>       * What area of the firmware are you willing to help out with
>       * Whether you want a prototype 3D printed case now (or we can
>         send injection moulded case later when ready)
>       * Whether you want a modem board now, your preference for 3G or
>         4G, and if so what 3G AND 4G frequency ranges your cellular
>         provider uses
>
>         (That is private information, so please don’t reply to this
>         mailing list - send to me privately).
>
>
>     I am not sure what the pricing will be (I’ll confirm nearer the
>     time), so nothing committed yet; just trying to get an indication
>     of interest. I am tying to arrange some sponsorship for this, for
>     the first few boards to go free to developers who have done the
>     most for the project; so if you can commit to do something
>     specific, please let me know.
>
>
> Once those boards go out to developers, my plan is to wait a month to
> ensure that no problems are found and we can get some basic
> functionality in the firmware similar to v2 basic capabilities (using
> v2 protocols and v2 apps). Assuming no hardware problems are found in
> that time, I’ll then push the button to start a first full production
> run of 100 to 200 sets.
>
> Regards, Mark.
>
>
>
>
>
>
>
>
> _______________________________________________
> OvmsDev mailing list
> OvmsDev at lists.teslaclub.hk
> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev

-- 
Michael Balzer * Helkenberger Weg 9 * D-58256 Ennepetal
Fon 02333 / 833 5735 * Handy 0176 / 206 989 26

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openvehicles.com/pipermail/ovmsdev/attachments/20170911/f6ee9de6/attachment.htm>