[Ovmsdev] Enclosure for OVMS v3

Mark Webb-Johnson mark at webb-johnson.net
Sat Nov 4 21:06:55 HKT 2017


Same as the 3D printed ones. 4 screws in the base.

Regards, Mark.

> On 4 Nov 2017, at 2:44 AM, Geir Øyvind Vælidalo <geir at validalo.net> wrote:
> 
> Nice 🙂
> 
> How are they held together?
> 
> Geir
> 
>> 3. nov. 2017 kl. 03:30 skrev Mark Webb-Johnson <mark at webb-johnson.net <mailto:mark at webb-johnson.net>>:
>> 
>> Injection moulding samples are in.
>> 
>> Clean and simple. And oh so black.
>> 
>> Regards, Mark
>> 
>> <D4ABB914-F9CE-4039-9826-6D442325A49E.PNG>
>> 
>> 
>> <9598949A-0221-46BF-93E8-F29FA1EF7C3C.PNG>
>> 
>> 
>> <32BCCD3F-B5C8-4954-BED4-2EC19B2CD89A.PNG>
>> 
>> 
>> <45F9A679-5611-4958-A6DA-17CC38AF84E2.PNG>
>> _______________________________________________
>> OvmsDev mailing list
>> OvmsDev at lists.teslaclub.hk <mailto:OvmsDev at lists.teslaclub.hk>
>> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
> 
> _______________________________________________
> OvmsDev mailing list
> OvmsDev at lists.teslaclub.hk
> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openvehicles.com/pipermail/ovmsdev/attachments/20171104/a15e43cb/attachment.htm>


More information about the OvmsDev mailing list