[Ovmsdev] Enclosure for OVMS v3

[Mark Webb-Johnson]

I’ll ask. It may be a bit late (as production has already started), but perhaps the guys in china can find something that already exists for this.

Regards, Mark.

> On 4 Nov 2017, at 2:59 AM, Frank Demes <frank.demes at gmx.de> wrote:
> 
> Any chance that we get some silicone plugs/caps for the USB/SD slots and the diag port. ;-)
> 
> I know, it‘s a Twizy problem, but it would help to keep the dust out.
> 
> Low tech approach with some electric tape is a fallback option, but maybe there is still a window for some add ons ;-)
> 
> Gruß
> Frank
> 
>> Am 03.11.2017 um 03:30 schrieb Mark Webb-Johnson <mark at webb-johnson.net>:
>> 
>> Injection moulding samples are in.
>> 
>> Clean and simple. And oh so black.
>> 
>> Regards, Mark
>> 
>> <D4ABB914-F9CE-4039-9826-6D442325A49E.PNG>
>> 
>> 
>> 
>> <9598949A-0221-46BF-93E8-F29FA1EF7C3C.PNG>
>> 
>> 
>> 
>> <32BCCD3F-B5C8-4954-BED4-2EC19B2CD89A.PNG>
>> 
>> 
>> 
>> <45F9A679-5611-4958-A6DA-17CC38AF84E2.PNG>
>> 
>> _______________________________________________
>> OvmsDev mailing list
>> OvmsDev at lists.teslaclub.hk
>> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
> 
> _______________________________________________
> OvmsDev mailing list
> OvmsDev at lists.teslaclub.hk
> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev