[Ovmsdev] Enclosure for OVMS v3

Geir Øyvind Vælidalo geir at validalo.net
Sun Dec 3 08:29:30 HKT 2017


Is it possible to get the stl-file for the enclosure so I can print my own? I’m going to be doing some proper testing in the car in the next weeks and have already managed to break off one of the capacitors. It came of quite easily, though, so it looks like it was a little bit loosely soldered. Luckily it was relatively easy to solder back on 🙂 

Best regards,
Geir

Sendt fra min iPhone

> 4. nov. 2017 kl. 14:06 skrev Mark Webb-Johnson <mark at webb-johnson.net>:
> 
> Same as the 3D printed ones. 4 screws in the base.
> 
> Regards, Mark.
> 
>> On 4 Nov 2017, at 2:44 AM, Geir Øyvind Vælidalo <geir at validalo.net> wrote:
>> 
>> Nice 🙂
>> 
>> How are they held together?
>> 
>> Geir
>> 
>>> 3. nov. 2017 kl. 03:30 skrev Mark Webb-Johnson <mark at webb-johnson.net>:
>>> 
>>> Injection moulding samples are in.
>>> 
>>> Clean and simple. And oh so black.
>>> 
>>> Regards, Mark
>>> 
>>> <D4ABB914-F9CE-4039-9826-6D442325A49E.PNG>
>>> 
>>> 
>>> <9598949A-0221-46BF-93E8-F29FA1EF7C3C.PNG>
>>> 
>>> 
>>> <32BCCD3F-B5C8-4954-BED4-2EC19B2CD89A.PNG>
>>> 
>>> 
>>> <45F9A679-5611-4958-A6DA-17CC38AF84E2.PNG>
>>> _______________________________________________
>>> OvmsDev mailing list
>>> OvmsDev at lists.teslaclub.hk
>>> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
>> 
>> _______________________________________________
>> OvmsDev mailing list
>> OvmsDev at lists.teslaclub.hk
>> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
> 
> _______________________________________________
> OvmsDev mailing list
> OvmsDev at lists.teslaclub.hk
> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openvehicles.com/pipermail/ovmsdev/attachments/20171203/80662b46/attachment.htm>


More information about the OvmsDev mailing list