[Ovmsdev] OVMS Leaf Support

[Mark Webb-Johnson]

I think the leaf spy app shows what can be done. It only uses standard OBDII, with just one can bus. It could also be using the other non-can OBDII buses, but I doubt it.

Shame it is not open source, but the leaf codes are pretty well documented now.

Regards, Mark

> On 14 Oct, 2013, at 4:00 pm, Nikki Gordon-Bloomfield <nikki at aminorjourney.com> wrote:
> 
> Oh yes, there are multiple CAN busses on the LEAF. The standard one, which is where all the data below comes from, an the EV can -- that would require some clever doodads, since both are on the same physical connector -- just different pins. 
> 
> Nikki. 
> 
> 
> 
> 
>> On 14 Oct 2013, at 04:50, Mark Webb-Johnson <mark at webb-johnson.net> wrote:
>> 
>> Robert,
>> 
>> Sorry for the delay in response - I’ve been off grid parenting for the past 24 hours.
>> 
>> I think @Nufkin has done some preparation work, and we have a stub vehicle support file (vehicle_nissanleaf.c), but nothing working yet.
>> 
>> This App shows what can be done:
>> 
>> https://play.google.com/store/apps/details?id=com.Turbo3.Leaf_Spy_Pro
>> 
>> <p8xv6n5_RAmWf7Ep4eAIOqj6vZripkrr9PiegqL_w-2ofBSXUKBkJeLb9tjBj1e4jSY=h310.png>
>> <JcBfvBo5NviN3mdrFw5Hqml-_gBqQUGBfLGHA_9AjQ3pm5nuQVv3SpBlBXHgib0VYr0=h310.png>
>> <n7hlJo_4pxWxvxefz91_lRe2r_QeHLDXtRlYZCW9ZOleyviqUNQODqPfn-L2MzqI9J8=h310.png><q8vJL1pIFDbR0df9VCzJWXW5X7CfsQ-EdtpzzrWQtqYg5A5zPMSStvRYNsy3Kgi3pdE=h310.png>
>> 
>> using just the OBD-II port (I assume all the single master CAN bus, but perhaps also other buses on OBD-II).
>> 
>> I’m very excited by this, and more than willing to help, but I don’t have the car here so am limited in what I can do.
>> 
>> Can you work with @nufkin (and his other half) on this?
>> 
>> You would need some sort of CAN bus decoder (perhaps just an OBD-II dongle, or CAN-USB adaptor), plus an OVMS module and PICKIT for firmware download. If you use MAC OSX, the development environment is simple to setup - for windows there are a few more hoops to jump through. Lastly, a RS232-USB adaptor is useful (but not essential).
>> 
>> Regards, Mark.
>> 
>>> On 13 Oct, 2013, at 4:00 pm, Robert Sharpe <robert.sharpe at evergreen-consulting.co.uk> wrote:
>>> 
>>> Hi,
>>> < ovmsdev-request at lists.teslaclub.hk>
>>> 
>>> Is anyone working on Leaf support?
>>> 
>>> I am interested in helping if I can and have started a discussion at http://openvehicles.com/comment/220#comment-220 to capture were we are with the Leaf.
>>> 
>>> 
>>> Regards,
>>> Robert Sharpe (Technical Director)
>>> 07711 252971
>>> http://www.facebook.com/EvergreenConsultingLtd
>>> http://twitter.com/EGCtechnical
>>> http://uk.linkedin.com/in/arsharpe
>>> 
>>> 
>>> www.evergreen-consulting.co.uk
>>> 
>>> Your Plugged-in Partner
>>> 
>>> Support the future and switch to a renewable energy supplier such as Good Energy
>>> 
>>> Evergreen Consulting is the trading name of Sharpe Consultants Ltd
>>> 
>>> 
>>> < /ovmsdev-request at lists.teslaclub.hk>_______________________________________________
>>> OvmsDev mailing list
>>> OvmsDev at lists.teslaclub.hk
>>> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
>> 
>> _______________________________________________
>> OvmsDev mailing list
>> OvmsDev at lists.teslaclub.hk
>> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
> 
> _______________________________________________
> OvmsDev mailing list
> OvmsDev at lists.teslaclub.hk
> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openvehicles.com/pipermail/ovmsdev/attachments/20131014/6485b919/attachment.htm>