[Ovmsdev] Broken Hardware

[Mark Webb-Johnson]

Patrick,

I'll reply off-list to this to get it repaired/replaced for you.

Regards, Mark.

On 14 Apr, 2013, at 10:41 PM, Patrick Kapsch wrote:

> Mark,
> It's connected to the Twizy, so 12V power.
> 
> Blink codes go like this:
> (Firmware code first)
> 10x green
> 10x green
> 10x green
> 10x green
> 2x green - 2x red together
> 1x green
> both LEDs on showing the reset
> 
> 
> Am 14.04.2013 um 16:01 schrieb Mark Webb-Johnson <mark at webb-johnson.net>:
> 
>> Patrick,
>> 
>> Is it powered by 12V (not by the ICSP 5V pins)?
>> 
>> Can you confirm the exact blink codes (for both red and green LEDs)?
>> 
>> Regards, Mark.
>> 
>> On 14 Apr, 2013, at 8:07 PM, Patrick Kapsch <patrick.kapsch at mac.com> wrote:
>> 
>>> I guess one of my three OVMS modules is broken. It keeps giving me 2x blink for "Can't communicate with modem" followed by a Modem reset and a new boot process. Any advice?
>>> 
>>> Patrick
>>> _______________________________________________
>>> OvmsDev mailing list
>>> OvmsDev at lists.teslaclub.hk
>>> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
>> 
>> _______________________________________________
>> OvmsDev mailing list
>> OvmsDev at lists.teslaclub.hk
>> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev
> 
> _______________________________________________
> OvmsDev mailing list
> OvmsDev at lists.teslaclub.hk
> http://lists.teslaclub.hk/mailman/listinfo/ovmsdev